SKU: daviescraig-dc8025

EWP115 Nylon Kit - 12V 115LPM/30GPM Remote Electric Water Pump (8025)

$285.00

or 4 payments of $71.25 with Info



In Stock


Calculate Shipping



Australia wide rate - $30.00 (ETA: 3 days)

Description

EWP115 Nylon Kit - 12V 115LPM/30GPM Remote Electric Water Pump (PART #8025)

The EWP115 Nylon 12V is available for purchase in following options:

  • Pump Only (Part #8125) 
  • Kit (Part #8025)
  • Combo with Controller (Part #8930)

The EWP115 (115 litres per minute) pump is suitable for small, medium, large, high- performance and 4WD vehicles. It’s a performance product that improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy.

 The EWP115 is a practical alternative to the mechanical belt-driven pump or fitted as an auxiliary pump. Mechanical belt-driven water pumps run directly off the motor and sap engine power … the EWP115 is hardwired into your electrical system, by-passing the engine and releasing up to an additional 10kw (13hp).

  

 

KIT CONTENTS

DESCRIPTION

UNITS

EWP115 (Nylon) 12V

1

Adapter Rubber Sleeve 3mm (1/8”)

2

Hose Clamps

2

EWP Basic Pump Loom

1

Hardware Bag EWP115 Kit

1

Instructions

1

 

Technical Specifications

 Voltage

12 Volt Pump

Operating voltage

3V DC to 15V DC

Maximum current

10A @ 13V

Flow rate (max)

115 L/min (30.38 US gal/min) @ 13V DC

Operating temp.

-40° to 130°C
   (-40° to 266°F)

Pump design

Clockwise centrifugal with volute chamber

Pump weight

920 grams (2.03 lb)

Pump material

Nylon 66 - 30% Galss Filled

Burst pressure

500 kPa (72.5 psi)

Seal

Ceramic face seal

Self Priming

No, none of our pumps are self-priming

Fits hose sizes

35mm to 51mm (1⅜” to 2”)

Push on Fittings

Push-On fitting Size

EWP Inlet & Outlet 38mm

  • with 3mm Sleeve (#8510) 44mm
  • with 6mm Sleeve (#8511) 51mm

 

Combined with an LCD EWP/Fan Digital Controller (Sold separately Part #8002 or combo #8930) , the pump continues to run after you’ve switched off, eliminating “heat soak” and extending engine life.

Davies, Craig’s revolutionary, Australian-designed EWP pumps are made from anti-corrosive, lightweight nylon reinforced with fibreglass. Universal fit allows for easy mounting into the bottom radiator hose. Our kits come with easy-to-understand DIY instructions and everything you need for easy installation, including different adaptors to fit various hose sizes and all necessary electrical wiring.

An Electric Water Pump is one of the most economical way to increase horsepower and save on fuel consumption whilst caring for your engine.

Used in conjunction with a Davies, Craig EWP header adaptor kit, it can replace the mechanical water pump completely.

The world’s most advanced total engine cooling management system:


 universal fit

 more power

 more cooling

 increase fuel efficiency

 extend engine life

 world-leading technology

 

EWP INSTALLATION OPTIONS

Installing an EWP as an AUXILIARY PUMP

  • Leaving the mechanical water pump in place, install the EWP into the bottom radiator hose.
  • Remove the thermostat and drill two approx. 3mm (1/8") holes in the thermostat plate to allow some coolant circulation when the thermostat is closed. Re-install ensuring that the thermostat housing is clean and a new gasket is used if required.

EWP INSTALLATION – disabling Mechanical water pump

  • Leaving the mechanical water pump in place, install the EWP into the bottom radiator hose and remove the manufacturer’s thermostat.
  • You will need to bypass the water pump pulley by installing an appropriate length belt (not supplied). This method makes for an easy installation.
  • If running the pump continuously remove the thermostat and drill two approx. 3mm (1/8") holes in the thermostat plate to allow some coolant circulation. Re-install ensuring that the thermostat housing is clean and a new gasket is used if required.

In both these cases, the EWP will pump past the impeller of the mechanical water pump.

Disengaged mechanical water pump (recommended)

  • Remove the mechanical water pump and remove the thermostat.
  • Then remove the impeller from the mechanical pump shaft. Retain the mechanical water pump using the pump pulley as an idler to avoid re-routing the drive belt.
  • Block any bypass passages and re-install the disengaged water pump ensuring that all gasket surfaces are clean and the new gaskets are properly fitted to prevent leaks.
  • Install the EWPÒ into the bottom radiator hose.

Removed mechanical water pump (Ideal)

  • Remove the mechanical water pump and thermostat from the engine.
  • Install a Davies Craig EWP Header Adaptor or blanking plate (not supplied). Ensuring the gasket surfaces are clean and the appropriate gasket or sealant is used to prevent leaks.
  • Install the EWP into the bottom radiator hose. This method will require you to modify or replace the standard radiator hose.
  • Install an appropriate length belt (not supplied) to drive the accessories.

In most cases EWP will be adequately supported by the radiator hose. Where mounting is required, the EWP must be soft mounted to protect against vibration. For the EWP115, EWP130 and EWP150 Part #8700 Mounting bracket is recommended.

 

Product Selection Guide

 

Application

 

Pump Model

Pump Kit

Pump Combo

Controller / Switch

Part # 12 V

Part # 24 V

Part# 12 V

Part # 24 V

Part # 12 V

Part # 24 V

Motorbike up to 500cc (Standard)

EBP15

9001

 

 

 

0444 or 0500

 

 

Motorbike 500cc - 1000cc (Std)

EBP23

 

9050

 

 

 

 

0444 or 0500

 

 

Motorbike 1000cc - 2000cc (Std)

EBP25

 

9005

 

 

 

 

0444 or 0500

 

 

Vehicle Heater System (Standard)

EBP23

 

9050

 

 

 

 

0444 or 0500

 

 

LPG (Butane) System (Standard)

EBP23

 

9050

 

 

 

 

0444 or 0500

 

 

Intercooler

(depending on capacity)

EBP23

9050

 

 

 

 

 

EBP25

9005

 

 

 

 

 

EBP40

9040

9041

 

 

0444 or 0500

0444 or 0500

EWP80

8005

 

8807

 

 

 

 

Engines up to 2.0L (Standard)

EWP80

 

8005

 

 

8807

 

 

8000

 

8000

 

Engines up to 2.0L - 3.5L (Standard)

EWP115

8025 or

8040

8026 or

8041

8830 or

8850

8831 or

8851

 

8000

 

8000

 

Engines up to 3.5L - 5.0L (Standard)

EWP130

 

8080

 

8081

 

8890

 

8891

 

8000

 

8000

 

Engines 5.0L or greater (Standard)

EWP150

 

8060

 

8061

 

8870

 

8871

 

8000

 

8000

Modified Engines

Supercharged/Turbo

EWP150

 

8060

 

8061

SKU daviescraig-dc8025
Brand DAVIES CRAIG
Shipping Weight 13.0000kg
Shipping Width 0.500m
Shipping Height 0.200m
Shipping Length 0.250m

More From This Category


$74.34

or 4 payments of $18.59 with Info

SKU: jrad-JWP0174

Jayrad Water Pump for E36 E46 E34 E39 E60 320 323 325 328 330 2.2L

$81.60

or 4 payments of $20.40 with Info

SKU: jrad-JWP0117

Jayrad Water Pump for Accord/Civic/Odyssey/CR-V

$120.49

or 4 payments of $30.12 with Info

SKU: jrad-JWP0132

Jayrad Water Pump for F250/F350 F-Series 5.4 4.6L

$47.59

or 4 payments of $11.90 with Info

SKU: jrad-JWP0033

Jayrad Water Pump for 4Runner/Hiace/Hilux/Townace 2L

$68.35

or 4 payments of $17.09 with Info

SKU: jrad-JWP001

Jayrad Water Pump for Falcon EF-BA 4.0L 03+ - With Pulley

$202.33

or 4 payments of $50.58 with Info

SKU: jrad-JWP0157

Jayrad Water Pump for Cherokee WK Diesel 12+/300C

$158.57

or 4 payments of $39.64 with Info

SKU: jrad-JWP0169

Jayrad Water Pump for A3 Q3 8V 8U/Caddy Polo Golf 1.2L 1.4L

$129.15

or 4 payments of $32.29 with Info

SKU: jrad-JWP0011WH

Jayrad Water Pump for Hilux KUN16/26 KZN - With Housing

$7.00

or 4 payments of $1.75 with Info

SKU: daviescraig-dc8309

DAVIES CRAIG L Adaptor 35mm Push On Fitting (8309)

$1,149.00

or 4 payments of $287.25 with Info

SKU: MEZ-WP119CHD

Meziere Electric Water Pump for Chevy LS, 42GPM Heavy Duty Motor - Chrome

$90.74

or 4 payments of $22.68 with Info

SKU: jrad-JWP0048

Jayrad Water Pump for Forester/Impreza/WRX/Liberty RS GT

$61.64

or 4 payments of $15.41 with Info

SKU: jrad-JWP0028

Jayrad Water Pump for Patrol GQ/GU 2.8L

$230.00

or 4 payments of $57.50 with Info

SKU: daviescraig-dc8126

DAVIES CRAIG EWP115 Nylon - 24V 115LPM/30GPM Remote Electric Water Pump (8126)

$715.00

or 4 payments of $178.75 with Info

SKU: MEZ-WP100U

Meziere Electric Water Pump for Chevy BB, 35GPM Standard Motor - Polished

$29.00

or 4 payments of $7.25 with Info

SKU: daviescraig-dc8303

DAVIES CRAIG 38mm L Adaptor Alloy (8303)

$537.90

or 4 payments of $134.47 with Info

SKU: daviescraig-dc8970

EWP150 Combo - 12V 150LPM/40GPM Remote Electric Water Pump & Controller (8970)

$61.47

or 4 payments of $15.37 with Info

SKU: jrad-JWP0031

Jayrad Water Pump for Forester/Impreza/WRX/Liberty/Outback

$224.51

or 4 payments of $56.13 with Info

SKU: jrad-JWP0096

Jayrad Water Pump for Commodore VE/VF L76 L98 LS2 LS3 08-17

$34.00

or 4 payments of $8.50 with Info

SKU: daviescraig-dc1026

DAVIES CRAIG Alloy Adaptor -20 AN (1-5/8 - 12 UNF) (1026)

$408.29

or 4 payments of $102.07 with Info

SKU: jrad-JWP0114

Jayrad Water Pump for Golf 09+/Polo 10+/Jetta CAVD 1.8L 11+

Stay Updated

Secure Payment Options

Encrypted Checkout

Comodo Secure