Stroker R2 Billet Camshafts (EVO 4-8)
GSC Power Division has been in operation since 2004, and it specializes in the design and manufacture of high performance camshafts and valve train components.
NOW IN BILLET - AVAILABLE FROM APRIL
We worked with English Racing on this profile to offer the 2.2-2.4L lower reving engines a profile that would allow for more air volume in the cylinder to help fill the larger displacement engines and make more midrange and top end power. The 6008R2 is a high lift very aggressive profile with a short overall duration to keep a lower usable rpm band. The 6008R2 is designed to rev between 4000-8500 rpms and should be used with a stroked engine or added displacement engine. The peak lift of 12.0MM Intake and exhaust will require upgraded valve springs and a titanium retainer with special attention to seal to retainer clearance. With the lift of this profile it is suggested to only use the 5041/5040 Ti retainer and spring kits do to valve seal to retainer clearance.
The 5041 can be used to 40+psi and the 5040 to 32psi on the R2 profile at 8500rpms without float or flutter issues. The profile will work fine on the OEM Rocker Arm and the Zero-tick lifter or with the OEM lifter. We have seen gains of 25-30whp over the S2 profile on the stroked applications with much more possible when used with a ported head and aftermarket intake manifold. .
SKU | GSC-7008R2 |
Brand | GSC POWER DIVISION |
Shipping Weight | 25.0000kg |
Shipping Width | 0.500m |
Shipping Height | 0.200m |
Shipping Length | 0.250m |
$439.71
or 4 payments of $109.93 with
Info
$508.02
or 4 payments of $127.00 with
Info
$1,331.00
or 4 payments of $332.75 with
Info
$511.16
or 4 payments of $127.79 with
Info
$1,072.50
or 4 payments of $268.12 with
Info
$756.86
or 4 payments of $189.22 with
Info
$819.50
or 4 payments of $204.88 with
Info
$417.01
or 4 payments of $104.25 with
Info