header Menu
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 4 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 4 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 4 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 4 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 4 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 4 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 4 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 4 Port Black PTFE Stainless Steel Braid
SKU: pf-PFE662-LSKIT4

Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 4 Port Black PTFE Stainless Steel Braid

PROFLOW

$328.00

or 4 payments of $82.00 with Info



In Stock


Calculate Shipping


Australia wide rate - $45.00


item: Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 4 Port Black PTFE Stainless Steel Braid

Proflow's LS water cross over kits eliminate trapped air and steam from your cylinder heads, preventing hot spots and overheating. This can cause head gasket failures, lean cylinders and pre-ignition. They connect to the vent ports on each corner of the cylinder heads (2 port or 4 ports options available), which is then routed to either the radiator or water pump. This kit includes stainless steel PTFE black braided hose and the appropriate fittings and distribution blocks for a simple installation. They also offer a more attractive look than the OE rigid hard lines and provide flexibility when using aftermarket intakes and other accessories on performance LS vehicles. Will not suit factory intake (requires 20mm of clearance under the manifold). 

Suits the following engines:

  • LS1/LS6
  • LS2/LS3/L76/L77/L98

Proflow's LS water cross over kits eliminate trapped air and steam from your cylinder heads, preventing hot spots and overheating. This can cause head gasket failures, lean cylinders and pre-ignition. They connect to the vent ports on each corner of the cylinder heads (2 port or 4 ports options available), which is then routed to either the radiator or water pump. This kit includes stainless steel PTFE black braided hose and the appropriate fittings and distribution blocks for a simple installation. They also offer a more attractive look than the OE rigid hard lines and provide flexibility when using aftermarket intakes and other accessories on performance LS vehicles. Will not suit factory intake (requires 20mm of clearance under the manifold). 

Suits the following engines:

  • LS1/LS6
  • LS2/LS3/L76/L77/L98

SKU pf-PFE662-LSKIT4
Brand PROFLOW
Shipping Weight 25.0000kg
Shipping Width 0.400m
Shipping Height 0.300m
Shipping Length 0.400m

More From This Category


$75.61

or 4 payments of $18.90 with Info

SKU: pf-PFE583-16HP

Proflow 90 Degree Male Fitting Orb Hose End To -16AN Polished

$829.95

or 4 payments of $207.49 with Info

SKU: PSR-RWH-406

PSR/Raceworks Parallel Fuel Rail Kit No FPR PSR-RWH-406

$7.55

or 4 payments of $1.89 with Info

SKU: RWM-025-7

Raceworks Raceworks 15cm Day Glo Number 7 CAMS Approved RWM-025-7

$8.17

or 4 payments of $2.04 with Info

SKU: RWF-729-08BK

Raceworks Metric Male M10X1.0 To Male Flare AN-6 AN-8 RWF-729-08BK

$35.51

or 4 payments of $8.88 with Info

SKU: pf-PFE700-08L

Proflow Fitting Inlet Fuel Adaptor Male Holley Fuel Bowl 7/8 x 20 To -08AN Male 3in. Blue

$989.95

or 4 payments of $247.49 with Info

SKU: PSR-RWH-255

PSR/Raceworks Parallel Fuel Rail Kit GFB FX-S PSR-RWH-255

$10.02

or 4 payments of $2.50 with Info

SKU: pf-PFE950-06-03

Proflow Female Adaptor -06AN To -03AN Male Reducer Blue

$22.23

or 4 payments of $5.56 with Info

SKU: ALY-044BK

Raceworks Lower Mounting Boss Kit R33 Rb25Det/ S14 S15 Sr20Det (6 Pack) ALY-044BK

Contact Us