DAVIES CRAIG TYREGUARD 400 SENSORS X 1 (1011)

Calculate Shipping

Australia wide rate - $25.00 (ETA: 3 days)

TyreGuard 400 Sensors x 1 (Part #1011)

Spare sensor x 1 for use with the TYREGUARD 400 Kit (Part No. 1015, 1017 & 1019) which allows you to monitoring the air pressure and temperature of up to 22 tyres with a pressure range of 0 to 145 psi. The sensors must be within 7.6 meters of the monitor however the distance can be extended a futher 8meters with the use of a Booster (Part No. 1020).

KIT COMPONENTS
TYRE SENSORS	1
ANTI-THEFT LOCKING RING KIT (SENSORS)	1
BATTERY CR1632 (3V LITHIUM)	1
Tool	1

SPECIFICATIONS
SENSOR WORKING TEMPERATURE	-20C - 85C
SENSOR WORKING HUMIDITY	0 - 95%
SENSOR DIMENSIONS	23 X 21 X 21MM
SENSOR WEIGHT	9G
SENSOR BATTERY VOLTAGE	3v DC (CR1632)
PRESSURE MEASURE RANGE	0 – 145 PSI
PRESSURE MEASURE PRECISION	±4.35 PSI
TEMPERATURE MEASURE RANGE	- 20C - 85C
TEMPERATURE MEASURE PRECISION	±3C
MONITOR WORKING VOLTAGE	3V DC
SIGNAL TRANSMITTING FREQUENCY	433.92 MHz

TPMS Sensor Protective Tip

To help protect your vehicle’s Sensors and caps from stone damage & tapping on the wheel rim which may fracture the Sensor battery cradles, a piece of ½” heater hose fits snugly over the cap and valve stem with the small amount of the cap protruding. This is a very economical and successful option to place on all Sensors. (See image below)