header Menu
CUSCO LSD type-RS FOR Mark II JZX110 (1JZ-GTE VVT-i) LSD 159 F 1&2WAY
CUSCO LSD type-RS FOR Mark II JZX110 (1JZ-GTE VVT-i) LSD 159 F 1&2WAY
SKU: CRS80-LSD-159-F

CUSCO LSD type-RS FOR Mark II JZX110 (1JZ-GTE VVT-i) LSD 159 F 1&2WAY

Part Number: LSD 159 F

$1,864.89

or 4 payments of $466.22 with Info



In Stock


Calculate Shipping


Australia wide rate - $35.00


TYPE-RS Limited Slip Differential


In the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.

The RS Springs sit inside the pressure rings which helps engage the rear lock and the number of springs can be added or subtracted for personal customization.

 

typers2_1.jpg 

 

 

 

 

 

 

These RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.

 

 

Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components!  Specialized cam profiles are available for custom orders.

 


• 1 way LSD
Specially suited for front wheel drive cars and AWD car front axles. Activates under acceleration, and acts as a true LSD when the throttle is off.

 

• 1.5 way LSD
Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.


• 2 way LSD
Recommended on rear wheel drive cars and AWD car rear axles. Activates on both acceleration and deceleration. Recommended for those who prefer aggressive driving and big angle drifting.

 

 

 

 

 

 

 

 

 

 

 

 



 


 

 

All Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.

SKU CRS80-LSD-159-F
Brand CUSCO
Shipping Weight 15.0000kg
Shipping Width 0.600m
Shipping Height 0.200m
Shipping Length 0.600m

More From This Category


$915.75

or 4 payments of $228.94 with Info

SKU: clutchmaster-16077-HD00

Single Disc Clutch Kits FX100 16077-HD00 FOR Toyota Truck 4Runner 1996-2002 6

$763.98

or 4 payments of $191.00 with Info

SKU: exedy-ZF005

Exedy Single Mass Lightweight Flywheel for (MX-5 NA6C 89-93)

$864.88

or 4 payments of $216.22 with Info

SKU: clutchmaster-FW-735-4TDS

CLUTCH MASTER (Twin Disc Clutch Kits)725 Series Steel Flywheel: FW-735-4TDS

$3,100.00

SKU: TS2CD-TPCK-2JZ-GTE-JZA80

OS Giken TS2CD Twin Plate Clutch Kit For Toyota Supra 2JZ-GTE JZA80

$1,864.89

or 4 payments of $466.22 with Info

SKU: CRS123-LSD-160-F

CUSCO LSD type-RS FOR Supra GA70 (1G-GTE) LSD 160 F 1&2WAY

$486.72

or 4 payments of $121.68 with Info

SKU: MANTIC-SRF1030

MANTIC CLUTCH Steel Replacement Flywheel SRF1030

$1,711.59

or 4 payments of $427.90 with Info

SKU: CRS669-LSD-181-F2

CUSCO LSD type-RS FOR Impreza WRX Wagon GF8 (EJ20G) LSD 181 F2 1&2WAY

$2,799.41

SKU: CUSCO-235-660022TP

CUSCO TWIN METAL PLATE CLUTCH FOR BE5 (EJ206)660 022 TP