TOMEI OIL GALLERY ORIFICE RB26DETT

Calculate Shipping

Australia wide rate - $15.00 (ETA: 3 days)

OIL GALLERY ORIFICE

The Orifice controls the amount of oil flow that is delivered to the head to lubricate the parts in the cylinder head and to cool down the engine assembly. However the stock oil-gallery orifice has a hole that is too large which allows too much oil to be delivered to the cylinder head which will cause the problems as listed below.

(1) Too much blow-by Gas,
(2) Blowing engine oil,
(3) Leaking oil through the valve guides,
(4) Insufficient oil delivery to the crank journal,
(5) Allows air pockets into the system from when the oil pan is under horizontal G-Forces.

The TOMEI oil gallery orifice was designed from the experience and data we had obtained from the development of our N1 endurance and drag racing engines. By restricting the diameter of the orifice to φ1.5mm (Normal is φ2.0mm) we succeeded in securing enough lubrication to the camshaft and valve while maintaining the correct amount of oil in the oil pan which resolved the common problems. (For added Blow by prevention, we recommend using the TOMEI 3D Profile pistons.)

Product	Model	Engine code			Note
Oil Gallery Orifice	BNR32 BCNR33 BNR34	RB26DETT			ø1.5 ・Combine with STD orifice to use ・For RB25&20, solid type engines ONLY (not to be used on lash type RB20 & RB25 engines)

SKU	191071
Brand	TOMEI
Shipping Weight	0.2000kg
Shipping Width	0.070m
Shipping Height	0.040m
Shipping Length	0.090m
Shipping Cubic	0.000252000m3