Syphon Pumps

• Easy to use, polyethylene pumps syphon liquids to lower levels than the height at which the pump is installed
• Easy to prime and start within 6–7 strokes
• Pumps require no further operation and keep working in auto position, emptying the fluid being pumped
• All pumps are equipped with a vent cap, opening the cap stops the discharge
• Complete with flexible corrugated discharge tube
• Recommended for water-based fluids, detergents, waxes, soaps, antifreeze, some mild acids and other liquids compatible with pump materials of construction
• Pump should only be used with light weight and non inflammable liquids
• Do not use with fluids not compatible with materials used in the pump construction. These pumps must never be used with concentrated acids, Acetone, Benzene etc.
• WARNING: Pumps must not be used with hot fluids at temperatures above 60°C

• Easy to use, polyethylene pumps syphon liquids to lower levels than the height at which the pump is installed
• Easy to prime and start within 6–7 strokes
• Pump requires no further operation and keep working in auto position, emptying the fluid being pumped
• All pumps are equipped with a vent cap, opening the cap stops the discharge
• Complete with flexible corrugated discharge tube
• Recommended for water-based fluids, detergents, waxes, soaps, antifreeze, some mild acids and other liquids compatible with pump materials of construction
• Pump should only be used with light weight and non inflammable liquids
• Do not use with fluids not compatible with materials used in the pump construction. These pumps must never be used with concentrated acids, Acetone, Benzene etc.
• WARNING: Pumps must not be used with hot fluids at temperatures above 60°C
• Suits: 5-20 pails
• Length: 533mm
• Discharge: 6.5 LPM (2GPM)