header Menu
Proflow Exhaust Headers Stainless Steel Extractors 253/308 V8 Holden HQ HJ HX HZ WB Tuned Length 1-3/4'' Primary Set
Proflow Exhaust Headers Stainless Steel Extractors 253/308 V8 Holden HQ HJ HX HZ WB Tuned Length 1-3/4'' Primary Set
Proflow Exhaust Headers Stainless Steel Extractors 253/308 V8 Holden HQ HJ HX HZ WB Tuned Length 1-3/4'' Primary Set
Proflow Exhaust Headers Stainless Steel Extractors 253/308 V8 Holden HQ HJ HX HZ WB Tuned Length 1-3/4'' Primary Set
SKU: pf-PFEEH5225S

Proflow Exhaust Headers Stainless Steel Extractors 253/308 V8 Holden HQ HJ HX HZ WB Tuned Length 1-3/4'' Primary Set

PROFLOW

$1,199.00

or 4 payments of $299.75 with Info



In Stock


Calculate Shipping


Australia wide rate - $55.00


item: Proflow Exhaust Headers Stainless Steel Extractors 253/308 V8 Holden HQ HJ HX HZ WB Tuned Length 1-3/4'' Primary Set

Give your car that deep, throaty note that only stainless steel headers give. Proflow’s AISI 304 stainless steel headers are manufactured from a higher percentage of chromium and nickel elements than the standard minimum composition, making them harder and more resistant to corrosion. All headers are welded in a jig to ensure no warping occurs and each flange is laser cut from 10 mm plate for high accuracy. Available for most popular V8 models and come with gaskets and bolts.

  • 304 stainless steel headers 
  • Full length
  • Feature 1-3/4" primary tubes, 3-1/2" collectors
  • Use with original motor mounts to fit properly
  • Built with surface machined thick stainless steel flanges for a great seal 
  • Mandrel bent 

Note: Will not fit vehicles with half cable/half linkage. Will not fit cars with factory air conditioning.

Give your car that deep, throaty note that only stainless steel headers give. Proflow’s AISI 304 stainless steel headers are manufactured from a higher percentage of chromium and nickel elements than the standard minimum composition, making them harder and more resistant to corrosion. All headers are welded in a jig to ensure no warping occurs and each flange is laser cut from 10 mm plate for high accuracy. Available for most popular V8 models and come with gaskets and bolts.

  • 304 stainless steel headers 
  • Full length
  • Feature 1-3/4" primary tubes, 3-1/2" collectors
  • Use with original motor mounts to fit properly
  • Built with surface machined thick stainless steel flanges for a great seal 
  • Mandrel bent 

Note: Will not fit vehicles with half cable/half linkage. Will not fit cars with factory air conditioning.

SKU pf-PFEEH5225S
Brand PROFLOW
Shipping Weight 35.0000kg
Shipping Width 0.500m
Shipping Height 0.300m
Shipping Length 0.500m

More From This Category


$138.00

or 4 payments of $34.50 with Info

SKU: xf-TY-AW35-63

XForce Universal Tips - 2.5in Inlet/Twin 3.5in Round Angle-Cut Tip

$125.90

or 4 payments of $31.48 with Info

SKU: pf-PFETI-MB300-90

Proflow Titanium Tubing Mandrel-Bend 3.00 in. 1.2mm Wall 90 Deg 152x152mm

$1,499.00

or 4 payments of $374.75 with Info

SKU: TR-ES10011

PSR Equal Length Exhaust Manifold/Headers with HEAT COATING

$1,050.00

or 4 payments of $262.50 with Info

SKU: 4AGE_T25-NIL_1

6BOOST Low Mount T25/NIL 'OPEN ENTRY' FOR TOYOTA 4AGE RWD

$1,250.00

or 4 payments of $312.50 with Info

SKU: 1GGTE_T3-50_1

6BOOST T3/50 'OPEN ENTRY' Single 50mm Wastegate Port FOR TOYOTA 1GGTE

$43.59

or 4 payments of $10.90 with Info

SKU: pf-PFEHS-49032

Proflow Heat Shield Express Velcro Aramid Up to 500°C 1m Length 32 mm ID

$1,450.00

or 4 payments of $362.50 with Info

SKU: RB2530-DOHC_SR_FPPM_T6-60

6BOOST Forward(P) T6 (Large Frame PROMOD/60 FPPM Single 60mm - Small Runner FOR NISSAN RB25/30DET (D

$1,536.25

or 4 payments of $384.06 with Info

SKU: COB-VW29TP38

VW Golf GTD (Mk7) 2.0 TDI (5G) (14-17) GTI Style Rear Exhaust (TP38)

Contact Us