header Menu
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 2 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 2 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 2 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 2 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 2 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 2 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 2 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 2 Port Black PTFE Stainless Steel Braid
SKU: pf-PFE662-LSKIT2

Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 2 Port Black PTFE Stainless Steel Braid

PROFLOW

$187.98

or 4 payments of $46.99 with Info



In Stock


Calculate Shipping


Australia wide rate - $30.00 (ETA: 3 days)


item: Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 2 Port Black PTFE Stainless Steel Braid

Proflow's LS water cross over kits eliminate trapped air and steam from your cylinder heads, preventing hot spots and overheating. This can cause head gasket failures, lean cylinders and pre-ignition. They connect to the vent ports on each corner of the cylinder heads (2 port or 4 ports options available), which is then routed to either the radiator or water pump. This kit includes stainless steel PTFE black braided hose and the appropriate fittings and distribution blocks for a simple installation. They also offer a more attractive look than the OE rigid hard lines and provide flexibility when using aftermarket intakes and other accessories on performance LS vehicles.

Suits the following engines:

  • LS1/LS6
  • LS2/LS3/L76/L77/L98
  • LSA

Proflow's LS water cross over kits eliminate trapped air and steam from your cylinder heads, preventing hot spots and overheating. This can cause head gasket failures, lean cylinders and pre-ignition. They connect to the vent ports on each corner of the cylinder heads (2 port or 4 ports options available), which is then routed to either the radiator or water pump. This kit includes stainless steel PTFE black braided hose and the appropriate fittings and distribution blocks for a simple installation. They also offer a more attractive look than the OE rigid hard lines and provide flexibility when using aftermarket intakes and other accessories on performance LS vehicles.

Suits the following engines:

  • LS1/LS6
  • LS2/LS3/L76/L77/L98
  • LSA

SKU pf-PFE662-LSKIT2
Brand PROFLOW
Shipping Weight 12.0000kg
Shipping Width 0.300m
Shipping Height 0.300m
Shipping Length 0.300m

More From This Category


$13.62

or 4 payments of $3.41 with Info

SKU: SHS-350BE

Raceworks Straight Silicone Hose 3.5'' (89mm) X 90mm Blue 90mm SHS-350BE

$16.14

or 4 payments of $4.04 with Info

SKU: pf-PFE753-10

Proflow Fitting Adaptor Male 5/8in. Bspp To -10AN Blue

$49.35

or 4 payments of $12.34 with Info

SKU: RWF-132-16BK

Raceworks Female To Female Swivel Straight 45 Degree RWF-132-16BK

$62.70

or 4 payments of $15.68 with Info

SKU: pf-PFE930-12-10BK

Proflow Fitting Aluminium AN Y-Adaptor -12AN Male To -10AN Male x 2 Black

$47.41

or 4 payments of $11.85 with Info

SKU: pf-PFE456-08-06BK

Proflow Fuel Block Log -08AN Side Ports & 3 x -06AN Ports Black

$49.11

or 4 payments of $12.28 with Info

SKU: pf-PFE826-12BK

Proflow Flare Flare Union Adaptor -12AN To 3/4in. NPT On Run Black

$59.39

or 4 payments of $14.85 with Info

SKU: pf-PFE102-16HP

Proflow 45 Degree Hose End -16AN Hose to Female Polished

$14.53

or 4 payments of $3.63 with Info

SKU: pf-PFE131-04-06

Proflow Female Flare Union Swivel Hose End Straight -04AN To -06AN Blue

Contact Us