SKU: MANTIC-M924234

MANTIC CLUTCH Twin Organic Cushioned Sprung M924234

M924234

$2,562.77


In Stock


Calculate Shipping



Australia wide rate - $40.00

Description

Item: MANTIC CLUTCH Twin Organic Cushioned Sprung M924234

Product Description

This clutch kit is designed to replace the Original Equipment (OE) unit including the OE flywheel.

This kit includes a solid mass flywheel (SMF). If your vehicle was fitted with a dual mass flywheel (DMF) as original equipment (OE), changing from a dual mass flywheel (DMF) to a solid flywheel (SMF) increases the reliability of your clutch system and allows the flywheel to be machined for longer life. However you might experience slightly more noise or vibration comparied to a DMF clutch system.

Designed and manufactured to replace the clutch system installed as Original Equipment, a Mantic Track replacement clutch kit offers a extremely high torque capacity increase.

Each component has been thoroughly tested and developed for a specific application.

This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 60 years of experience in developing and manufacturing clutch kits for OEM and Aftermarket use, CI is the trusted source for a complete range of Clutch Kits suited to your vehicle.

WHY CHOOSE A MANTIC TRACK MULTIPLATE CLUTCH KIT

Performance Clutch Systems typically involve an increase in clamp load and/or use of aggresive friction material to achieve higher torque capacity. However there is a practical limit - Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reducing clutch system life and resulting in very high clutch pedal actuation effort. And the use of aggressive friction material will noticeably reduce driveability. Enter the benefits of a Mantic multi-plate clutch system. A 9 Twin Plate Mantic Track system has the same effective surface area as an 18 single plate clutch; and a 9 Triple Plate Mantic Track system equates to 27. So increasing clamp load is no longer a priority as the significantly larger surface area creates a massive torque capacity increase.

LIGHTENED ALUMINIMUM MANTIC TRACK COVER ASSEMBLY

Mantic Track cover assemblies are extremly light which reduce the moment of interia (MOI) acting on crank rotation mass, allowing your vehicle to develop faster acceleration through easier rev'ing.

ORGANIC FRICTION MATERIAL CLUTCH PLATES

The Torque Capacity of a Clutch Plate can be increased by using exotic cerametallic friction material featuring a higher coefficient of friction. However, cerametallic material reduces pedal feel and results in more sudden clutch engagement, reducing street driveability. This Mantic Track Clutch System features organic friction material on both sides of the clutch plates. This configuration retains excellent street driveability, while still assuring you a significant torque capacity inrease thanks to the multi-plate design.

STEEL BILLET PRECISION MACHINED FLYWHEEL

This is a Direct Fit Mantic Track Clutch kit and therefore includes a precision machined billet flywheel designed to suit high RPM applications. The flywheel includes a bolt kit and everything you need to assemble your Mantic Track Clutch System. If you wish to assemble a Mantic Track Clutch System to a different flywheel, as you have a non-standard engine/gearbox configuration, contact us for details on our non-direct fit kits.

Features

Information
Warranty

Mantic Stage 1, 2 and 3 Clutch Kits 1 year or 20,000 km (whichever occurs first) warranty from date of purchase. Mantic Stage 4, 5 and Track Series Kits (multi-plate) come with a 90 day satisfaction guarantee from date of purchase.

  • Warranty does not cover:
  • A. Normal wear and tear, including wear and tear of any friction materials forming the surface between the clutch disk and pressure plate or used as a component of the product
  • B. Any defect or damage caused by a collision or other accident
  • C. Any defect or damage caused by the failure to store, handle, install, assemble, maintain or use the product in accordance with manufacturer instructions or specifications, including but not limited to: (a) modification of the product by the customer in any way; or (b) installation of the product in a vehicle that is not in full compliance with the instructions and specifications of the manufacturer of that vehicle
  • D. Any defect or damage arising directly or indirectly as a result of racing or competing in the vehicle in which the product is installed
  • E. Any defect or damage arising directly or indirectly as a result of the failure to use and install an appropriate scatter shield
  • 6. We reserve the option to repair or replace products at no charge if found to be defective during the warranty period.
  • 7. This warranty will be VOID automatically if in our reasonable opinion the product has been subject to any unreasonable use, misuse, negligence, fire, or accident; or the product has been modified, repaired or dismantled without the prior written authorization; or any part has been replaced with a non-approved part. We reserve the sole right to inspect, evaluate and test the purportedly defective product in any way deemed appropriate by clutchsales.com.au, and then make the final decision as to whether the product in fact is faulty or defective in material or workmanship. This is our exclusive written warranty. We make no other express warranties, nor is anyone else authorized to make any express warranties on our behalf.
  • 8. Upon discovering a purported defect that you believe is covered by this warranty, you must immediately (within 30 days) return the product to us, together with a detailed written description of the purported defect and proof of original purchase.
  • 9. No warranty claim will be accepted under this warranty for incorrectly installed parts unless approved by clutchsales.com.au under the clutchsales.com.au ?No fault? warranty provision, which may be withheld at the absolute discretion of clutchsales.com.au.
  • 10. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
  • WARNING: DO NOT USE ANY CLUTCHSALES.COM.AU PRODUCT IN VEHICLES WHICH HAVE BEEN MODIFIED TO EXCEED THE MAXIMUM ENGINE RPM(S) BEYOND THAT WHICH WAS SPECIFIED BY THE ORIGINAL VEHICLE MANUFACTURER WITHOUT FIRST INSTALLING APPROPRIATE SAFETY EQUIPMENT, INCLUDING BUT NOT LIMITED TO TRANSMISSION GUARDS, AS SUCH USE MAY CAUSE THE PRODUCT TO EXPLODE UNEXPECTEDLY CAUSING SERIOUS INJURY AND/OR DEATH.
Feature 1 9 Lightened Aluminium Cover Assembly
Feature 2 Twin Organic Clutch Plates
Feature 3
Information
Weight (KG) 30.00
Package Length (CM) 40
Package Height (CM) 15
Package Width (CM) 30
Flywheel Specs
Tech Comments
Clutch Plate 225 x 10T x 27.0
Torque Capacity Peak: 1230Nm, Rated: 820Nm
Tech Documents Understanding Clutch Systems    Size: (6.64 MB)
Mantic Install    Size: (981.57 KB)
Vehicle Specific Clutch Kit Installation Notes    Size: (580.13 KB)
Vehicle Specific Clutch Kit - Installation Notes

Specifications

SKU MANTIC-M924234
Brand MANTIC CLUTCH
Shipping Weight 20.0000kg
Shipping Width 0.600m
Shipping Height 0.250m
Shipping Length 0.350m

More From This Category


$3,256.00

SKU: clutchmaster-05076-TD7S-A

Twin Disc Clutch Kits 725 Series 05076-TD7S-A FOR Dodge Neon 1994-1995 4

$1,218.97

or 4 payments of $304.74 with Info

SKU: clutchmaster-16161-HDTZ

Single Disc Clutch Kits FX300 16161-HDTZ FOR Toyota MR-2 1992-1995 4

$936.10

or 4 payments of $234.03 with Info

SKU: clutchmaster-08014-HR0F

Single Disc Clutch Kits FX250 08014-HR0F FOR Acura CL 1997-1999 4

$1,739.14

or 4 payments of $434.79 with Info

SKU: CRS348-LSD-141-F

CUSCO LSD type-RS FOR Lancer Evolution II CE9A (4G63) LSD 141 F 1&2WAY

$1,600.00

or 4 payments of $400.00 with Info

SKU: SSCKP-3SGE-SXE10

OS Giken Super Single (Pressed Steel) Clutch Kit for Toyota Altezza 3SGE SXE10

$1,322.75

or 4 payments of $330.69 with Info

SKU: clutchmaster-08K2F-HDB6-X

Single Disc Clutch Kits FX500 08K2F-HDB6-X FOR Acura K Motor-F Trans 2000-UP 4

$1,821.33

or 4 payments of $455.33 with Info

SKU: clutchmaster-03033-HDFF-D

Single Disc Clutch Kits FX350 03033-HDFF-D FOR BMW 128I 2008-2013 6

$1,739.14

or 4 payments of $434.79 with Info

SKU: CRS666-LSD-180-C

CUSCO LSD type-RS FOR Impreza WRX Wagon GF8 (EJ20G) LSD 180 C 1&1.5WAY

$1,422.47

or 4 payments of $355.62 with Info

SKU: clutchmaster-05046-HDTZ-H

Single Disc Clutch Kits FX300 05046-HDTZ-H FOR Mitsubishi Lancer 2007-2010 4

$1,170.13

or 4 payments of $292.53 with Info

SKU: clutchmaster-02027-HD00-D

Single Disc Clutch Kits FX100 02027-HD00-D FOR Audi A4 1997-2001 4

$1,210.83

or 4 payments of $302.71 with Info

SKU: clutchmaster-06064-HDC6

Single Disc Clutch Kits FX400 06064-HDC6 FOR Nissan Truck Frontier 2005-2014 6

$1,864.89

or 4 payments of $466.22 with Info

SKU: CRS123-LSD-160-F

CUSCO LSD type-RS FOR Supra GA70 (1G-GTE) LSD 160 F 1&2WAY

$1,935.51

or 4 payments of $483.88 with Info

SKU: CRS34-LSD-154-L15

CUSCO LSD type-RS FOR Celica ST202 (3S-GE) LSD 154 L15 1.5&2WAY

$3,069.45

SKU: O22-ORC-P1000F-NS0101

ORC 1000 SERIES TRIPLE PLATE CLUTCH KIT FOR BCNR33 (RB26DETT)

$55.00

or 4 payments of $13.75 with Info

SKU: Bearing-TK40

OS Giken Bearing TK40

$2,747.25

SKU: clutchmaster-15022-HDTZ-A

Single Disc Clutch Kits FX300 15022-HDTZ-A FOR Subaru Baja 2006-2006 4

$754.00

or 4 payments of $188.50 with Info

SKU: DCSCB49

DCS Hi Torque Cush Button for Toyota 2JZ non Turbo

$1,170.13

or 4 payments of $292.53 with Info

SKU: clutchmaster-06062-HDTZ

Single Disc Clutch Kits FX300 06062-HDTZ FOR Nissan Truck Frontier 1999-2004 6

$1,474.19

or 4 payments of $368.55 with Info

SKU: O9-250L-TT0407

ORC Standard type 250LIGHT SINGLE PLATE CLUTCH KIT FOR AE92 (4A-GE)

Stay Updated

Secure Payment Options

Encrypted Checkout

Comodo Secure