SKU: MANTIC-MS5-2002-CS

MANTIC CLUTCH Stage 5 Clutch Kit Inc SMF MS5-2002-CS

MS5-2002-CS

$1,051.71

or 4 payments of $262.93 with Info



In Stock


Calculate Shipping



Australia wide rate - $40.00

Description

Item: MANTIC CLUTCH Stage 5 Clutch Kit Inc SMF MS5-2002-CS

Product Description

This clutch kit is designed to replace the Original Equipment (OE) unit including the OE flywheel.

This kit includes a dual mass replacement flywheel which converts the clutch system to a solid mass flywheel (SMF). Changing from a dual mass flywheel (DMF) to a solid flywheel (SMF) increases the reliability of your clutch system and allows the flywheel to be machined for longer life. However you might experience slightly more noise or vibration comparied to a DMF clutch system.

Designed and manufactured to replace the clutch system installed as Original Equipment, a Mantic Stage 5 replacement clutch kit offers a strong torque capacity increase.

Each component has been thoroughly tested and developed for a specific application.

This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 60 years of experience in developing and manufacturing clutch kits for OEM and Aftermarket use, CI is the trusted source for a complete range of Clutch Kits suited to your vehicle.

MANTIC STAGE SERIES COVER ASSEMBLY

Mantic Stage 5 clutch kits feature a 20% increase (over original equipment) in clamp load for increased torque capacity.

SPHEROIDAL GRAPHITE CASTINGS

Approximately 300% stronger than a standard casting this material (sometimes referred to as an Anti Burst casting) not only increases strength by up to 3 times, it also improves heat dispersion.

BALANCED COVERS

To insure that the clutch system performs at maximum efficiency and that no unwanted vibration is generated as the cover spins, all Mantic Stage cover assemblies undergo a 2 stage balancing process.

CERAMETALLIC FRICTION MATERIAL CLUTCH PLATE - NON CUSHIONED, NON SPRUNG

The Torque Capacity of a Clutch Plate can be increased by using exotic cerametallic friction material featuring a higher coefficient of friction. However, cerametallic material reduces pedal feel and results in more sudden clutch engagement, reducing street driveability. Mantic Stage 5 Clutch Kits feature cerametallic friction material on both sides of the clutch plate, no segment cushioning and no hub springs. This results in a strong torque capacity increase compared with Stage 2 and more sudden engagement compared with Stage 3 or 4 kits. This type of configuration is not suitable for street use; but instead is finely tuned for the aggressive shifting required for various forms of motorsport. If you require a significant torque capacity increase, but still wish to drive your vehicle on the road, we recommend you purchase a Mantic Track multi plate clutch kit.

Features

Information
Warranty

Mantic Stage 1, 2 and 3 Clutch Kits 1 year or 20,000 km (whichever occurs first) warranty from date of purchase. Mantic Stage 4, 5 and Track Series Kits (multi-plate) come with a 90 day satisfaction guarantee from date of purchase.

  • Warranty does not cover:
  • A. Normal wear and tear, including wear and tear of any friction materials forming the surface between the clutch disk and pressure plate or used as a component of the product
  • B. Any defect or damage caused by a collision or other accident
  • C. Any defect or damage caused by the failure to store, handle, install, assemble, maintain or use the product in accordance with manufacturer instructions or specifications, including but not limited to: (a) modification of the product by the customer in any way; or (b) installation of the product in a vehicle that is not in full compliance with the instructions and specifications of the manufacturer of that vehicle
  • D. Any defect or damage arising directly or indirectly as a result of racing or competing in the vehicle in which the product is installed
  • E. Any defect or damage arising directly or indirectly as a result of the failure to use and install an appropriate scatter shield
  • 6. We reserve the option to repair or replace products at no charge if found to be defective during the warranty period.
  • 7. This warranty will be VOID automatically if in our reasonable opinion the product has been subject to any unreasonable use, misuse, negligence, fire, or accident; or the product has been modified, repaired or dismantled without the prior written authorization; or any part has been replaced with a non-approved part. We reserve the sole right to inspect, evaluate and test the purportedly defective product in any way deemed appropriate by clutchsales.com.au, and then make the final decision as to whether the product in fact is faulty or defective in material or workmanship. This is our exclusive written warranty. We make no other express warranties, nor is anyone else authorized to make any express warranties on our behalf.
  • 8. Upon discovering a purported defect that you believe is covered by this warranty, you must immediately (within 30 days) return the product to us, together with a detailed written description of the purported defect and proof of original purchase.
  • 9. No warranty claim will be accepted under this warranty for incorrectly installed parts unless approved by clutchsales.com.au under the clutchsales.com.au ?No fault? warranty provision, which may be withheld at the absolute discretion of clutchsales.com.au.
  • 10. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
  • WARNING: DO NOT USE ANY CLUTCHSALES.COM.AU PRODUCT IN VEHICLES WHICH HAVE BEEN MODIFIED TO EXCEED THE MAXIMUM ENGINE RPM(S) BEYOND THAT WHICH WAS SPECIFIED BY THE ORIGINAL VEHICLE MANUFACTURER WITHOUT FIRST INSTALLING APPROPRIATE SAFETY EQUIPMENT, INCLUDING BUT NOT LIMITED TO TRANSMISSION GUARDS, AS SUCH USE MAY CAUSE THE PRODUCT TO EXPLODE UNEXPECTEDLY CAUSING SERIOUS INJURY AND/OR DEATH.
Feature 1 Mantic Heavy Duty SGI Cover Assembly
Feature 2 Full Cerametallic Clutch Plate, Non-Cushion, Non-Sprung
Feature 3 Includes Solid Mass Flywheel
Information
Weight (KG) 25.00
Package Length (CM) 40
Package Height (CM) 15
Package Width (CM) 30
Flywheel Specs
Tech Comments
Clutch Plate 300 x 26T x 29.0
Torque Capacity Peak: 1222Nm, Rated: 977Nm
Tech Documents Understanding Clutch Systems    Size: (6.64 MB)
Vehicle Specific Clutch Kit Installation Notes    Size: (366.73 KB)
>Vehicle Specific Clutch Kit - Installation Notes    Size: (2.25 MB)

Specifications

SKU MANTIC-MS5-2002-CS
Brand MANTIC CLUTCH
Shipping Weight 20.0000kg
Shipping Width 0.600m
Shipping Height 0.250m
Shipping Length 0.350m

More From This Category


$1,618.95

or 4 payments of $404.74 with Info

SKU: exedy-NSK-7422DMF

Exedy SMF Conversion Clutch Kit Includes Flywheel for (350Z 02-07)

$1,851.11

or 4 payments of $462.78 with Info

SKU: CRS370-LSD-148-F2

CUSCO LSD type-RS FOR Lancer Evolution IV CN9A (4G63) LSD 148 F2 1&2WAY

$3,614.05

SKU: HKS-twin27-26011-AF001

HKS LA TWIN PLATE CLUTCH FOR Legacy (Liberty) Wagon BP5 (EJ20Y/EJ20X)

$1,607.65

or 4 payments of $401.91 with Info

SKU: clutchmaster-16250-HDB6-R

Single Disc Clutch Kits FX500 16250-HDB6-R FOR Lexus IS250 2006-2011 6

$1,864.89

or 4 payments of $466.22 with Info

SKU: CRS282-LSD-270-L15B

CUSCO LSD type-RS FOR Skyline ER34 (RB25DET) LSD 270 L15B 1.5&2WAY

$4,629.63

SKU: clutchmaster-17827-TD8S-A

Twin Disc Clutch Kits 850 Series 17827-TD8S-AH FOR Audi A3 2005-2011 4

$1,739.09

or 4 payments of $434.77 with Info

SKU: MANTIC-4TUSRF2384N

MANTIC CLUTCH 4TU Clutch Kit Inc SMF 4TUSRF2384N

$1,554.87

or 4 payments of $388.72 with Info

SKU: O34-ORC-309DS-01H

ORC Silent type 309 SERIES SINGLE PLATE CLUTCH KIT FOR EK4 (B16A)

$1,870.13

or 4 payments of $467.53 with Info

SKU: MANTIC-4TUDMR1697N

MANTIC CLUTCH 4TU Clutch Kit Inc SMF 4TUDMR1697N

$1,332.93

or 4 payments of $333.23 with Info

SKU: clutchmaster-04159-HDKV

Single Disc Clutch Kits FX200 04159-HDKV FOR Chevrolet Cavalier 2000-2002 4

$1,739.14

or 4 payments of $434.79 with Info

SKU: CRS687-LSD-182-F

CUSCO LSD type-RS FOR Impreza WRX Wagon GGB (EJ207) LSD 182 F 1&2WAY

$1,864.89

or 4 payments of $466.22 with Info

SKU: CRS162-LSD-162-L2

CUSCO LSD type-RS FOR 180SX RPS13/KPRS13 (SR20DET) LSD 162 L2 1.5&2WAY

$1,513.62

or 4 payments of $378.40 with Info

SKU: O28-400L-NS0207

ORC Standard type 400LIGHT SINGLE PLATE CLUTCH FOR S15 (SR20DE)400L-NS0207

$1,864.89

or 4 payments of $466.22 with Info

SKU: CRS3-LSD-986-L2

CUSCO LSD type-RS FOR 86 ZN6 (FA20) LSD 986 L2 1.5&2WAY

$1,158.77

or 4 payments of $289.69 with Info

SKU: MANTIC-4TU2218N

MANTIC CLUTCH 4TU Clutch Kit 4TU2218N

$1,864.89

or 4 payments of $466.22 with Info

SKU: CRS487-LSD-453-F

CUSCO LSD type-RS FOR Lancer Evolution X CZ4A (4B11) LSD 453 F 1WAY

$3,815.63

SKU: clutchmaster-17028-TD7R-A

Twin Disc Clutch Kits 725 Series 17028-TD7R-AH FOR Volkswagen GTI 2002-2005 6

$1,719.58

or 4 payments of $429.89 with Info

SKU: clutchmaster-17036-HDC6-4

Single Disc Clutch Kits FX400 17036-HDC6-4SK FOR Audi A3 1999-2003 4

$3,459.50

SKU: clutchmaster-06045-TD7S-A

Twin Disc Clutch Kits 725 Series 06045-TD7S-A FOR Nissan Skyline 1989-1993 6

Stay Updated

Secure Payment Options

Encrypted Checkout

Comodo Secure