SKU: HS12SS1HDP

Invidia Equal Length Headers for Subaru BRZ/Toyota 86 12-20

HEADERS

$1,299.00

or 4 payments of $324.75 with Info



In Stock


Calculate Shipping



Australia wide rate - $65.00

Description

Item: Invidia Equal Length Headers for Subaru BRZ/Toyota 86 12-20

INVIDIA EQUAL LENGTH HEADERS

Unleash maximum engine performance with Invidia S304 Stainless Steel Equal (Tuned) Length Catless Headers. These headers dramatically reduce the restriction of the factory system and will provide more horsepower and torque to the FA20 motor. Includes a Check Engine Light (CEL) fix module to prevent the common Check Engine Light when using aftermarket headers with a factory tune (caused by unexpected change in O2 sensor readings).

 

INVIDIA PERFORMANCE

Far more engineering goes in to the design of an exhaust system than many realise. From a performance perspective, there is a fine balance between exhaust back pressure and exhaust gas velocity. Too large a diameter pipe, and low down power and torque is sacrificed (particularly on naturally aspirated cars), too small a diameter or added restrictions and bottle necks in the system, and the engine is unable to push gasses out of the combustion chamber efficiently, reducing power and torque. There are many other technical aspects such as "scavenging effect" which are beyond the scope of this document, but the point is, it's not as simple as just strap on a drain pipe and gains for days. A "quality" exhaust system maximizes performance gains by design.

Invidia High Performance employ a team of engineers and conduct thorough research and development for every single exhaust component they manufacture, ensuring performance to match the customer's needs in every instance, including the use of the highest quality High Flow Catalytic Converters where applicable.

 

INVIDIA SOUND

What an exhaust sounds like is typically the number one factor when choosing a system. The acoustics of an exhaust system are hugely complex. Many people believe that all an exhaust does is muffle the natural tone of the engine, but in the vast majority of cases this is far from the truth, in fact companies like Ferrari, Lamborghini, Pagani, Porsche and alike all spend massive amounts of time and money "fine tuning" their exhaust systems to sound exactly how they want them to. Put a straight pipe on just about any hypercar and that distinctive engine note is lost.

Tuning the sound of an exhaust system adds an additional layer of complexity to the performance aspect of the design process. The goal is to design a system that sounds great, without adversely affecting performance. Invidia spend countless hours on research and development, including listening to customer feedback in order to fine tune their systems to suit the target market for each model from the quieter Q300 to the Race orientated G5 Titan, so you can be assured your car sounds its absolute best, without sacrificing performance.

 

INVIDIA CONSTRUCTION

The final piece of the puzzle is perhaps the most important of all. you don't have to be an expert to realise that all the research and development in the world means nothing if the final product is built with sub-standard materials, using sub-standard manufacturing techniques. From the very beginning, Invidia employ state of the art manufacturing techniques to ensure form, fit and finish are all on point.

 First, a 3D scan is take of the underside of the car to ensure fitment is 100% correct.  Next, grade 304 Stainless Steel  (with the exception of their titanium systems of course) is selected for all piping, mufflers and flanges. This particular grade is chosen for its strength, durability (ability to withstand the elements),  and its ability to be formed and welded with relative consistency and ease. Cast flanges are then used which ensures 100% correct fitment every time, no leaks or additional stress points, and long lasting strength.    , an

Finally, robotic welding machines are used to ensure every single weld is uniform and precise, not only adding a huge amount of strength, but also removing manufacturing variances which are unavoidable when doing a task by hand. This means every system that rolls off the production line is just about as identical as possible. All built to the same incredible high standard. Did we mention it also looks absolutely awesome?  

  

   INVIDIA LIFETIME WARRANTY

Buy with confidence! Invidia Exhausts Australia's LIFETIME WARRANTY applies to this product. Invidia Exhausts Australia warrants all of its products with a limited lifetime warranty policy. Lifetime Warranty covers:

  • Structural welds
  • Mufflers and internals
  • Cracks
  • Manufacture defects

Lifetime Warranty does not cover:

  • Catalytic Convertors (2 Years warranty)
  • Logo or Invidia Badge falling off
  • Scrapes or scrubbing
  • Crashes/Vehicle Accidents

Terms and conditions apply.

(HS12SS1HDP)

About Invidia

PERFORMANCE

Far more engineering goes in to the design of an exhaust system than many realise. From a performance perspective, there is a fine balance between exhaust back pressure and exhaust gas velocity. Too large a diameter pipe, and low down power and torque is sacrificed (particularly on naturally aspirated cars), too small a diameter or added restrictions and bottle necks in the system, and the engine is unable to push gasses out of the combustion chamber efficiently, reducing power and torque. There are many other technical aspects such as "scavenging effect" which are beyond the scope of this document, but the point is, it's not as simple as just strap on a drain pipe and gains for days. A "quality" exhaust system maximizes performance gains by design.

Invidia High Performance employ a team of engineers and conduct thorough research and development for every single exhaust component they manufacture, ensuring performance to match the customer's needs in every instance, including the use of the highest quality High Flow Catalytic Converters where applicable.


SOUND

What an exhaust sounds like is typically the number one factor when choosing a system. The acoustics of an exhaust system are hugely complex. Many people believe that all an exhaust does is muffle the natural tone of the engine, but in the vast majority of cases this is far from the truth, in fact companies like Ferrari, Lamborghini, Pagani, Porsche and alike all spend massive amounts of time and money "fine tuning" their exhaust systems to sound exactly how they want them to. Put a straight pipe on just about any hypercar and that distinctive engine note is lost.

Tuning the sound of an exhaust system adds an additional layer of complexity to the performance aspect of the design process. The goal is to design a system that sounds great, without adversely affecting performance. Invidia spend countless hours on research and development, including listening to customer feedback in order to fine tune their systems to suit the target market for each model from the quieter Q300 to the Race orientated G5 Titan, so you can be assured your car sounds its absolute best, without sacrificing performance.


CONSTRUCTION

The final piece of the puzzle is perhaps the most important of all. you don't have to be an expert to realise that all the research and development in the world means nothing if the final product is built with sub-standard materials, using sub-standard manufacturing techniques.

Invidia take a huge amount of pride in the final product and in Australia, their Stainless Steel systems are backed with a lifetime warranty*, which speaks for itself.

So what are the differences? For starters, Invidia use Grade 304 Stainless Steel (with the exception of their titanium systems of course). This particular grade is chosen for its strength, durability (ability to withstand the elements), as well as it's ability to be formed and welded with relative consistency and ease.

From the very beginning, Invidia employ state of the art manufacturing techniques to ensure form, fit and finish are all on point. A 3D scan is take of the underside of the car to ensure fitment is 100% correct. Cast flanges are used in the construction which ensure 100% correct fitment every time, with no leaks or additional stress points.

Specifications

SKU HS12SS1HDP
Brand INVIDIA
Shipping Weight 50.0000kg
Shipping Width 0.800m
Shipping Height 0.300m
Shipping Length 0.400m

More From This Category


$1,350.00

or 4 payments of $337.50 with Info

SKU: VVTi_SP-50_25nb_1

6BOOST Stock Position (STD POSITION)/50 Single 50mm 25nb FOR TOYOTA 1JZGTE VVTi

$45.00

or 4 payments of $11.25 with Info

SKU: XTR420007-25

Oil Drain Kit GT/GTX/EFR Series -8AN Male (Extended)

$65.00

or 4 payments of $16.25 with Info

SKU: ST8-3951

Stage 8 Fasteners, M10 x 1.25 Nut & Lock Kit

$1,275.00

or 4 payments of $318.75 with Info

SKU: RB30_VBG-50_1

6BOOST V-BAND(GARRETT G25/30/35)/50 Single 50mm FOR NISSAN RB30ET (SOHC)

$1,275.00

or 4 payments of $318.75 with Info

SKU: BARRA_VBP-50_1

6BOOST V-BAND(PRECISION PT55-67)/50 Single 50mm FOR FORD BARRA BA-FG + (X SERIES)

$1,399.00

or 4 payments of $349.75 with Info

SKU: xf-H2-VE03-98-02KIT

XForce Header and Cat Kit, 1-3/4in Primary, Stainless Steel H2-VE03-98-02KIT

$1,200.00

or 4 payments of $300.00 with Info

SKU: 3SGTE205_PM_VBT-45_1

6BOOST Pro Mod V-BAND(TIAL GT28/30/35)/45 Single 45mm FOR TOYOTA 3SGTE CELICA ST205

$1,075.00

or 4 payments of $268.75 with Info

SKU: SR20_LM_VBG-45_1

6BOOST Low Mount V-BAND(GARRETT G25/30/35)/45 Single 45mm FOR NISSAN SR20DE/DET/VE/VET

$90.00

or 4 payments of $22.50 with Info

SKU: XTR420006

Oil Drain Kit GT/GTX/EFR Series -8AN Male 90°

$1,450.00

or 4 payments of $362.50 with Info

SKU: RB2630-DOHC_FPPM_VBG-50_1

6BOOST Forward(P) V-BAND(GARRETT G40/42/45)/50 FPPM Single 50mm FOR NISSAN RB26/30DET (DOHC)

$1,050.00

or 4 payments of $262.50 with Info

SKU: CA18_T3-45_1

6BOOST T3/45 'OPEN ENTRY' Single 45mm Wastegate Port FOR NISSAN CA18DET

$1,575.00

or 4 payments of $393.75 with Info

SKU: xf-HS-VF82KIT

XForce Header and Cat Kit 4-1 - 1-3/4in Primary - Stainless (Commodore SS/R8)

$1,275.00

or 4 payments of $318.75 with Info

SKU: TD-TB_VBG-50_1

6BOOST V-BAND(GARRETT G25/30/35)/50 Single 50mm FOR NISSAN TB42/TD42/TB45/TD45

$1,075.00

or 4 payments of $268.75 with Info

SKU: 3SGTE205_LM_VBP-45_1

6BOOST Low Mount V-BAND(PRECISION PT55-67)/45 Single 45mm FOR TOYOTA 3SGTE CELICA ST205

$1,450.00

or 4 payments of $362.50 with Info

SKU: BARRA_SPPM_VBG-50_1

6BOOST Stock Position V-BAND(GARRETT G40/42/45)/50 SPPM Single 50mm FOR FORD BARRA BA-FG

$1,645.00

or 4 payments of $411.25 with Info

SKU: xf-H2-FV08BKIT

XForce Header and Cat Kit (Falcon XR8/GT BA-BF) H2-FV08BKIT

$1,230.00

or 4 payments of $307.50 with Info

SKU: xf-H2-HV09B-KIT

XForce Tri Y Header Design 1 5/8" Primary Pipe H2-HV09B-KIT

$1,250.00

or 4 payments of $312.50 with Info

SKU: RB20-25_T3-50_1

6BOOST T3/50 'OPEN ENTRY' Single 50mm Wastegate Port FOR NISSAN RB20/25DET

$1,450.00

or 4 payments of $362.50 with Info

SKU: RB2530-DOHC_FPPM_VBP-50_2

6BOOST Forward(P) V-BAND(PRECISION PT76-85)/50 FPPM Single 50mm FOR NISSAN RB25/30DET (DOHC)

$1,250.00

or 4 payments of $312.50 with Info

SKU: VR6_VBG-NIL_1

6BOOST V-BAND(GARRETT G25/30/35) to suit IWG FOR VOLKSWAGEN MK5 GOLF VR6

Stay Updated

Secure Payment Options

Encrypted Checkout

Comodo Secure