SKU: HS10SL1DPC

Invidia Down Pipe/J Pipe w/High Flow Cat for Subaru Liberty GT BM/BR 10-12

DOWN/FRONT PIPES

$1,099.00

or 4 payments of $274.75 with Info



In Stock


Calculate Shipping



Australia wide rate - $45.00

Description

Item: Invidia Down Pipe/J Pipe w/High Flow Cat for Subaru Liberty GT BM/BR 10-12

INVIDIA DOWN PIPE

The most restrictive component of the factory exhaust system is the down-pipe which begins right after the turbocharger. Invidia Exhausts use a larger pipe diameter and smooth bends which allows the turbocharger to exhale exhaust gases with fewer restrictions and turbulence. Because of these reasons, Invidia down-pipes make for the most popular exhaust upgrade that adds a substantial bump in both horsepower and torque with a great reduction in turbo lag.

To withstand the high temperatures seen at the turbocharger, laser cut cast steel flanges are used to ensure long lasting leak free reliability. A High-Flow catalytic converted is utilised to control emissions for street driving legalities but with minimal impact to exhaust flow. This is a 100% bolt on installation for right-hand drive vehicles with no modifications or changes required.  Factory O2 sensor locations are also retained to ensure compatibility with factory systems.

 

INVIDIA PERFORMANCE

Far more engineering goes in to the design of an exhaust system than many realise. From a performance perspective, there is a fine balance between exhaust back pressure and exhaust gas velocity. Too large a diameter pipe, and low down power and torque is sacrificed (particularly on naturally aspirated cars), too small a diameter or added restrictions and bottle necks in the system, and the engine is unable to push gasses out of the combustion chamber efficiently, reducing power and torque. There are many other technical aspects such as "scavenging effect" which are beyond the scope of this document, but the point is, it's not as simple as just strap on a drain pipe and gains for days. A "quality" exhaust system maximizes performance gains by design.

Invidia High Performance employ a team of engineers and conduct thorough research and development for every single exhaust component they manufacture, ensuring performance to match the customer's needs in every instance, including the use of the highest quality High Flow Catalytic Converters where applicable.

 

INVIDIA SOUND

What an exhaust sounds like is typically the number one factor when choosing a system. The acoustics of an exhaust system are hugely complex. Many people believe that all an exhaust does is muffle the natural tone of the engine, but in the vast majority of cases this is far from the truth, in fact companies like Ferrari, Lamborghini, Pagani, Porsche and alike all spend massive amounts of time and money "fine tuning" their exhaust systems to sound exactly how they want them to. Put a straight pipe on just about any hypercar and that distinctive engine note is lost.

Tuning the sound of an exhaust system adds an additional layer of complexity to the performance aspect of the design process. The goal is to design a system that sounds great, without adversely affecting performance. Invidia spend countless hours on research and development, including listening to customer feedback in order to fine tune their systems to suit the target market for each model from the quieter Q300 to the Race orientated G5 Titan, so you can be assured your car sounds its absolute best, without sacrificing performance.

 

INVIDIA CONSTRUCTION

The final piece of the puzzle is perhaps the most important of all. you don't have to be an expert to realise that all the research and development in the world means nothing if the final product is built with sub-standard materials, using sub-standard manufacturing techniques. From the very beginning, Invidia employ state of the art manufacturing techniques to ensure form, fit and finish are all on point.

 First, a 3D scan is take of the underside of the car to ensure fitment is 100% correct.  Next, grade 304 Stainless Steel  (with the exception of their titanium systems of course) is selected for all piping, mufflers and flanges. This particular grade is chosen for its strength, durability (ability to withstand the elements),  and its ability to be formed and welded with relative consistency and ease. Cast flanges are then used which ensures 100% correct fitment every time, no leaks or additional stress points, and long lasting strength.    , an

Finally, robotic welding machines are used to ensure every single weld is uniform and precise, not only adding a huge amount of strength, but also removing manufacturing variances which are unavoidable when doing a task by hand. This means every system that rolls off the production line is just about as identical as possible. All built to the same incredible high standard. Did we mention it also looks absolutely awesome?  

  

   INVIDIA LIFETIME WARRANTY

Buy with confidence! Invidia Exhausts Australia's LIFETIME WARRANTY applies to this product. Invidia Exhausts Australia warrants all of its products with a limited lifetime warranty policy. Lifetime Warranty covers:

  • Structural welds
  • Mufflers and internals
  • Cracks
  • Manufacture defects

Lifetime Warranty does not cover:

  • Catalytic Convertors (2 Years warranty)
  • Logo or Invidia Badge falling off
  • Scrapes or scrubbing
  • Crashes/Vehicle Accidents

Terms and conditions apply.

(HS10SL1DPC)

About Invidia

PERFORMANCE

Far more engineering goes in to the design of an exhaust system than many realise. From a performance perspective, there is a fine balance between exhaust back pressure and exhaust gas velocity. Too large a diameter pipe, and low down power and torque is sacrificed (particularly on naturally aspirated cars), too small a diameter or added restrictions and bottle necks in the system, and the engine is unable to push gasses out of the combustion chamber efficiently, reducing power and torque. There are many other technical aspects such as "scavenging effect" which are beyond the scope of this document, but the point is, it's not as simple as just strap on a drain pipe and gains for days. A "quality" exhaust system maximizes performance gains by design.

Invidia High Performance employ a team of engineers and conduct thorough research and development for every single exhaust component they manufacture, ensuring performance to match the customer's needs in every instance, including the use of the highest quality High Flow Catalytic Converters where applicable.


SOUND

What an exhaust sounds like is typically the number one factor when choosing a system. The acoustics of an exhaust system are hugely complex. Many people believe that all an exhaust does is muffle the natural tone of the engine, but in the vast majority of cases this is far from the truth, in fact companies like Ferrari, Lamborghini, Pagani, Porsche and alike all spend massive amounts of time and money "fine tuning" their exhaust systems to sound exactly how they want them to. Put a straight pipe on just about any hypercar and that distinctive engine note is lost.

Tuning the sound of an exhaust system adds an additional layer of complexity to the performance aspect of the design process. The goal is to design a system that sounds great, without adversely affecting performance. Invidia spend countless hours on research and development, including listening to customer feedback in order to fine tune their systems to suit the target market for each model from the quieter Q300 to the Race orientated G5 Titan, so you can be assured your car sounds its absolute best, without sacrificing performance.


CONSTRUCTION

The final piece of the puzzle is perhaps the most important of all. you don't have to be an expert to realise that all the research and development in the world means nothing if the final product is built with sub-standard materials, using sub-standard manufacturing techniques.

Invidia take a huge amount of pride in the final product and in Australia, their Stainless Steel systems are backed with a lifetime warranty*, which speaks for itself.

So what are the differences? For starters, Invidia use Grade 304 Stainless Steel (with the exception of their titanium systems of course). This particular grade is chosen for its strength, durability (ability to withstand the elements), as well as it's ability to be formed and welded with relative consistency and ease.

From the very beginning, Invidia employ state of the art manufacturing techniques to ensure form, fit and finish are all on point. A 3D scan is take of the underside of the car to ensure fitment is 100% correct. Cast flanges are used in the construction which ensure 100% correct fitment every time, with no leaks or additional stress points.

Specifications

SKU HS10SL1DPC
Brand INVIDIA
Shipping Weight 25.0000kg
Shipping Width 0.500m
Shipping Height 0.300m
Shipping Length 0.400m

More From This Category


$999.00

or 4 payments of $249.75 with Info

SKU: HS14FM4DPC

Invidia Down Pipe w/High Flow Cat for Ford Mustang Ecoboost FM/FN 15-20

$699.00

or 4 payments of $174.75 with Info

SKU: HS17CTRDP-A

Invidia Down Pipe Catless for Honda Civic FK8 Type R 17+

$1,099.00

or 4 payments of $274.75 with Info

SKU: HS17CTRDPC

Invidia Down Pipe w/High Flow Cat for Honda Civic FK8 Type R 17+

$1,220.40

or 4 payments of $305.10 with Info

SKU: GRM-GRM007082

Catted Downpipe for WRX/STi/Forester XT 02-07

$795.00

or 4 payments of $198.75 with Info

SKU: PRL-HC10-FP

PRL FRONT PIPE UPGRADE for HONDA CIVIC 1.5T 2016-21

$799.00

or 4 payments of $199.75 with Info

SKU: HKS-33004-BT003

HKS 60mm Front Pipe w/High Flow Cat FOR Subaru BRZ ZD8/Toyota GR86 22+

$850.00

or 4 payments of $212.50 with Info

SKU: PRL-HCR-FP

PRL FRONT PIPE UPGRADE for CIVIC TYPE R FK8 2017+

$300.00

or 4 payments of $75.00 with Info

SKU: S1303G3LA001T

AVO Cast Nickel-Iron Bellhousing for AVO Downpipes - VF38/VF44/VF47/TD04HLA

$599.00

or 4 payments of $149.75 with Info

SKU: HS16HC4DPN

Invidia Catless Down Pipe for Honda Civic Inc RS FC/FK 16-21 (1.5T)

$610.00

or 4 payments of $152.50 with Info

SKU: S6Z12E3G7065T

AVO 2.5" Stainless Steel Front Pipe & 5" Cat FOR BRZ/86

$599.00

or 4 payments of $149.75 with Info

SKU: HS20TGYFPR

Invidia 3" Resonated Front Pipe Catless for Toyota Yaris GR XPA16R

$87.40

or 4 payments of $21.85 with Info

SKU: GRM-77044

Grimmspeed 3" Downpipe Adapter - Aftermarket Downpipe to OEM Catback for Subaru

$43.40

or 4 payments of $10.85 with Info

SKU: GRM-20002

Turbo to Downpipe Gasket for EVO 8-9

$949.00

or 4 payments of $237.25 with Info

SKU: APEXI-145-H003

APEXI GT FRONT PIPE EXHAUST FOR HONDA CIVIC FL5 145-H003

$43.40

or 4 payments of $10.85 with Info

SKU: GRM-33001

Grimmspeed 033001 3-Bolt APS Downpipe Gasket - 3-Bolt for Subaru

$32.40

or 4 payments of $8.10 with Info

SKU: GRM-28001

Grimmspeed 028001 Turbo to Downpipe Gasket for Subaru

$899.00

or 4 payments of $224.75 with Info

SKU: RCM367

RCM 3" Open Neck JDM Twin Scroll Catless Downpipe for Subaru WRX/STI 01-07

Stay Updated

Secure Payment Options

Encrypted Checkout

Comodo Secure