header Menu
ID1700-XDS Injector Single, 48mm Length, 14mm Grey Adaptor Top, 15mm Lower O-Ring
ID1700-XDS Injector Single, 48mm Length, 14mm Grey Adaptor Top, 15mm Lower O-Ring
SKU: id-1700.48.14.15

ID1700-XDS Injector Single, 48mm Length, 14mm Grey Adaptor Top, 15mm Lower O-Ring

ID1700-XDS

$466.40

or 4 payments of $116.60 with Info



In Stock


Calculate Shipping


Australia wide rate - $20.00 (ETA: 3 days)


Item: ID1700-XDS Injector Single, 48mm Length, 14mm Grey Adaptor Top, 15mm Lower O-Ring

The ID1700x is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport. The ID1700x was designed to fill the gap between the ID1300x and the ID2000, and like the ID1300x, it features corrosion resistant internals making it compatible with all known automotive fuels.
A unique magnetic circuit, resulting from a lengthy development program, makes the ID1700x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. The ID1700x excels at high pressures typical of current automotive systems, and will perform flawlessly in these applications.

The ID1700x was designed to be an all fuel compatible injector, capable of very high flow rates. As such, it will most often be used to deliver E85 to boosted engines, or occasionally, gasoline in extreme high horsepower applications. Neither of these applications requires extended linearity at low flow rates, and so this was given a proportionately lower priority during the design process.

The ID1700x will deliver flawless stoichiometric idle and cruise mixtures on E85, but like the ID2000, should not be expected to do so on gasoline.

If you need flawless drivability on gasoline, the ID1300x will provide this, and is capable of approximately 150hp per injector on E85.

 

Note: Some vehicles may have multiple possible injector sizes available. Always compare sizing provided in the listing (length and O-Ring size) against injectors currently fitted to vehicle.

Specifications

  • Nominal Flow Rate: 1725cc/min @ 3.0 Bar (43.5 psi) Using Iso-Octane at 52 Degrees C (125 Degrees F)
  • Maximum Differential Fuel Pressure: 7.0 Bar (101.5 psi)
  • Fuel Compatibility: Compatible with Methanol/Ethanol/All Known Hydrocarbon Fuels.
  • Electrical Connector: USCAR

Vehicle Fitment

Vehicle Fitment is provided as a guide only to narrow down results. Please check listing for any additional information (measurements, specifications, additional notes) which may affect compatibility or ask for assistance.

SKU id-1700.48.14.15
Brand INJECTOR DYNAMICS
Shipping Weight 3.0000kg
Shipping Width 0.300m
Shipping Height 0.150m
Shipping Length 0.200m

More From This Category


$699.95

or 4 payments of $174.99 with Info

SKU: DW-18U-02-0550-4

Deatschwerks 550cc/min Injectors - 4 Pack (Silvia 89-90)

$1,592.80

or 4 payments of $398.20 with Info

SKU: id-1300.60.14.14.4

ID1300-XDS Injectors Set of 4, 60mm Length, 14mm Purple Adaptor Top, 14mm Lower O-Ring - Nissan SR20

$594.95

or 4 payments of $148.74 with Info

SKU: DW-22S-01-0420-4

Deatschwerks 420cc/min Injectors - 4 Pack (Civic 92-00/Integra 91-01)

$1,548.80

or 4 payments of $387.20 with Info

SKU: xsinj-XS1000M8-10-10

XS 1000cc Fuel Injectors SET x8 XS1000M8-10-10

$3.25

or 4 payments of $0.81 with Info

SKU: id-92

Injector Dynamics Denso lower cushion for ID injectors (Each)

$699.95

or 4 payments of $174.99 with Info

SKU: DW-16U-00-0042-6

Deatschwerks 42 lb/hr Injectors - 6 Pack (Mustang V6 11-15/Wrangler 12-17)

$824.95

or 4 payments of $206.24 with Info

SKU: DW-18U-02-0650-4

Deatschwerks 650cc/min Injectors - 4 Pack (Silvia 89-90)

$594.95

or 4 payments of $148.74 with Info

SKU: DW-42M-11-0800-4

Deatschwerks 800cc/min 11mm Low Impedance Upper Injectors - 4 Pack

Contact Us