header Menu
HKS METAL CATALYZER for SUBARU Forester SG5 (EJ205) 1/05-12/06
HKS METAL CATALYZER for SUBARU Forester SG5 (EJ205) 1/05-12/06
SKU: hks-SG5-EJ205-33005-AF008

HKS METAL CATALYZER for SUBARU Forester SG5 (EJ205) 1/05-12/06

SG5 (EJ205)

$3,432.99

or 4 payments of $858.25 with Info



In Stock


Calculate Shipping


Australia wide rate - $60.00


ITEM: HKS METAL CATALYZER for SUBARU Forester SG5 (EJ205) 1/05-12/06

The Metal Catalyzer that has both high output and high purification system.
Impreza WRX/TA-GDA, TA-GGA/Forester/New for TA-SG5

Features

  • Adopted 150 cell Metal Catalyzer with public organization's certificate of 10-15 mode exhaust gas test.
  • From turbo exit to center muffler as one Front Pipe which has extension for turbo exit.
  • HKS original φ65 Spherical surface gasket (stock: φ60) and main pipeφ75 (stock: φ60) is adopted which provide better exhaust performance.
  • Because main exhaust stream from turbine and bypass exhaust stream meet right after the turbine for stock, secondary exhaust pressure goes up. So you can't have a smooth exhaust flow. HKS has made separate type of joint part for exit from turbine which will have efficient turbo performance. (* see the graph below)
  • Stock has 2 catalyzer for Front Pipe and Center Pipe. But HKS has only one catalyzer for Front Pipe, so the Center Pipe is just expansion pipe that provides less resistance. Therefore in all range it has about 1.5kgf/m more torque than the stock.

GDA exhaust gas test result

 CO (g/km)THC (g/km)Nox (g/km)
Regulation Value1.2700.1700.170
Test result0.3340.0550.028

 

 

?Caution

  • Heat shield plate modification is required.
  • If you use it with Racing suction (Reloaded), you might need to reset the CPU because of the other parts and condition of the vehicle.
  • There is not enough room for injector, so you need to boost up with such as EVC or actuator. For boosting up, you need to injector, bigger fuel pump and resetting the CPU.
  • Compatibility with Forester applied models A to C has not been confirmed.
  • Impreza applied model A and B has different layout, so you can't install.
  • The 4-speed AT vehicle has a different layout and not compatible, because of the exhaust gas test certificate will be no effect.

 

* Use of this products lead to change of boost pressure characteristics. Use of this product with HKS muffler is possible, however use with other manufacturers products and use with altered boost settings may require knocking and maximum boost setting inspection. If necessary please repeat setting.

  

VehicleClassificationModelEngineModel YearPipe SizeCode No.ManualRemarks
IMPREZA WRXTA-GDAEJ20502/11 -07/06φ70 x 2 - φ75 -φ6533005-AF008 For applied model C-G. For 5MT. Front pipe+Mid pipe included.

SKU hks-SG5-EJ205-33005-AF008
Brand HKS
Shipping Weight 40.0000kg
Shipping Width 0.600m
Shipping Height 0.300m
Shipping Length 0.400m

More From This Category


$810.00

or 4 payments of $202.50 with Info

SKU: S3A08M3HD065T

AVO Dual Stainless Steel Mufflers (Forester XT 08-12

$848.00

or 4 payments of $212.00 with Info

SKU: rb-IDX12900-PO

Redback Extreme Duty Exhaust for Isuzu D-MAX (07/2020-on)(No Muffler (pipe only))

$1,200.00

or 4 payments of $300.00 with Info

SKU: EVO4-9_FF_T3-2x40_DE_1

6BOOST Forward Facing T3/2x40 DIVIDED ENTRY Twin 40mm FOR MITSUBISHI 4G63 EVO 4-9

$190.00

or 4 payments of $47.50 with Info

SKU: xf-MF-LP08-3

XForce Universal 7in Cannon Muffler - 3in Inlet/4.5in Straight-Cut Tip

$1,898.75

or 4 payments of $474.69 with Info

SKU: COB-VW66YTP07

VW Polo GTI (6C) 1.8 TSI (15-17) Cat Back Performance Exhaust (Resonated, YTP7)

$1,898.75

or 4 payments of $474.69 with Info

SKU: COB-AU88YTP04

Audi A1 1.4 TFSI 150PS (15-17) Cat Back Performance Exhaust (Resonated, YTP4)

$3,098.75

or 4 payments of $774.69 with Info

SKU: COB-VZ18TP108-CF

Holden Corsa E VXR (15-18) Cat Back Performance Exhaust (Non Resonated, TP108-CF (Carbon Fibre))

$209.00

or 4 payments of $52.25 with Info

SKU: xf-TSB350-2

XForce 3.5" Tubing - 304 Brushed Stainless Steel TSB350-2

See Options
Contact Us