HALTECH ECU, HT-140961

HALTECH Elite 1000/1500 for Honda Integra DC5 HT-140961

Calculate Shipping

Australia wide rate - AUD$25.00 (ETA: 3 days)

Item: HALTECH Elite 1000/1500 Honda Integra DC5Plug 'n' Play Adaptor Harness HT-140961

Category: Elite ECU Harnesses

If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.

simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.

guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.

harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.

SUITS: Plug 'n' Play replacement of the factory ECU for Honda Integra DC5/Acura RSX 05-06 Manual transmission only. (Does not support factory multiplexed coolant temperature gauge, battery light and AC request - Please see the product quick start guide for further information)

INCLUDES: Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.

NOTES: Does not support factory multiplexed coolant temperature gauge, battery light and AC request - Please see the quick start guide for further information. Elite 1000 ECU does NOT support the factory intake runner control & check engine light. Please use the Elite 1500 if these functions are required.