header Menu
DIXCEL BRAKE PAD Fr. X for AUDI A6 4BAZAF(X-1381454)-0-700 deg
DIXCEL BRAKE PAD Fr. X for AUDI A6 4BAZAF(X-1381454)-0-700 deg
SKU: DIXCEL-X-1381454

DIXCEL BRAKE PAD Fr. X for AUDI A6 4BAZAF(X-1381454)-0-700 deg

Brake pad_ X type

$764.00

or 4 payments of $191.00 with Info



In Stock


Calculate Shipping


Australia wide rate - $25.00 (ETA: 3 days)


Item:DIXEL BRAKE PAD Fr. X for AUDI A6 4BAZAF(X-1381454)-0-700 deg

Xtype
Brake pads with consistent stopping power for heavier vehicles and upgraded oversized wheels.
  • Superior braking power to easily stop mini-vans and SUVs with upgraded oversized wheels.
  • Unlike the past brake pads which focused only on initial bite; the new pads offer braking power that is proportional to brake pedal pressure.
  • Firm brake pedal feel and proportional brake performance helps you forget the heavy weight of the car?Superior braking performance, less harsh to help prolong disc life.
  • An must-have item for cars with upgraded oversized wheels that use OEM brake calipers.
Friction Materials Graphite metallic
Effective Temperature Range 0?700?
μ
Max μ Ave μ Min μ
0.68 0.60 0.57
Applicable Stages Street, Off-road

X type is exclusive for use in Street, off-road and not suitable for on road circuit use.
In the case of on road circuit use and causeed early wear etc. We are totally not responsible. Please note this beforehand.

Xtype
Is it better to change the brake pads and brake discs at the same time?
Xtype ???
  • The radar chart represents a comparison of each characteristic between DIXCEL products and general OEM products.
  • Above values are based on actual test results.
    Anti-Noise and Anti-Dust values are tested and calculated after a proper bedding-in procedure has been completed.
The dust amount
  • ? The dust amount of DIXCEL M type
     (after 1,000 km mileage)
  • ? The dust amount of DIXCEL X type
     (after 1,000 km mileage)
Test data showing the superior performance of the X-type brake pads compared to the OEM brake pads

Brake pad performance comparison test of the X-type and OEM using a heavier vehicle with upgraded oversized wheels.

Test Vehicle :
DIXCEL tuned Toyota Alphard
Test Method :
Replicating ordinary street-use, full braking from 60km/h. Replicating highway-use, braking from 80km/h. Repeating each condition 5 times for the 3 different patterns listed below. Taking an average of the stopping distances not using the maximum and minimum values for each pattern.
Pattern 1 :
OEM wheels (16 inch) and OEM brake pads
Pattern 2 :
Aftermarket wheels (22 inch) and OEM brake pads
Pattern 3 :
Aftermarket wheels (22 inch) and DIXCEL X-type brake pads
? Comparison of braking distances
Upgrading your wheels to oversized aftermarket wheels without upgrading your brake pads can be dangerous! To avoid a decrease in brake performance, DIXCEL recommends upgrading your brake pads when upgrading to oversized aftermarket wheels!

SKU DIXCEL-X-1381454
Brand DIXCEL
Shipping Weight 8.0000kg
Shipping Width 0.300m
Shipping Height 0.100m
Shipping Length 0.300m

More From This Category


$916.00

or 4 payments of $229.00 with Info

SKU: EL624-EP357-EP291

ENDLESS SSM F & R SET FOR Impreza WRX GDB (EJ207) EP357+EP291

$448.00

or 4 payments of $112.00 with Info

SKU: EL21-EP312-Rear

ENDLESS SSM FOR Accord Wagon CH9 (H23A) 1/99-10/02 EP312 Rear

$471.00

or 4 payments of $117.75 with Info

SKU: DIXCEL-Z-1312383

DIXCEL BRAKE PAD Fr. Z for AUDI A4 2.0 17-(Z-1312383)-0-850 deg

$573.00

or 4 payments of $143.25 with Info

SKU: DIXCEL-AL-9919044

DIXCEL BRAKE PAD SP-? for BREMBO F3 CALIPER 20mm(AL-9919044)-

$383.00

or 4 payments of $95.75 with Info

SKU: DIXCEL-Z-1254561

DIXCEL BRAKE PAD Rr. Z for BMW E89 Z4 35i LM30(Z-1254561)-0-850 deg

$448.00

or 4 payments of $112.00 with Info

SKU: EL184-EP307-Front

ENDLESS SSM FOR Integra DC2 (B18C) 5/93-6/01 EP307 Front

$448.00

or 4 payments of $112.00 with Info

SKU: EL377-EP231-Rear

ENDLESS SSM FOR Skyline ER34 (RB25DET) 5/98-5/01 EP231 Rear

$177.00

or 4 payments of $44.25 with Info

SKU: DIXCEL-EC-361028

DIXCEL BRAKE PAD Fr. EC FOR IMPREZA GC1/2 -96/9(EC-361028)-0-450 deg

Contact Us