EWP80 Kit - 12V 80LPM/21GPM Remote Electric Water Pump (PART #8005)

The EWP80 is available for purchase in following options:

• Pump Only (Part #8105) 
• Kit (Part #8005)
• Combo with Controller (Part #8907)

The EWP80 Electric Water Pump – simple, do-it-yourself, easy to install, designed to complement or replace your existing belt-driven, mechanical water pump. It will fit most vehicle makes and models fitted with naturally-aspirated or turbo engines up to two litres. The revolutionary, Australian-designed EWP80 is made from anti-corrosive, lightweight, heat-resistant, glass-filled nylon and incorporates a ceramic faced seal for long-life durability.

The EWP80 greatly enhances engine cooling control while giving you added power and improved fuel economy. By removing the parasitic power losses of a belt-driven, mechanical water pump the EWP can provide up to 10kW (13hp) of extra power and increased torque.

Combined with an LCD EWP/Fan Digital Controller (Sold separately Part #8002 or combo #8907) will manage both the EWP and Thermatic fan operation. The Digital Controller will vary the speed of the EWP in response to the engine’s coolant temperature. Multiple temperature settings are provided on the Controller for either maximum power or fuel efficiency. The Thermatic Fan/s will be activated automatically once the engine coolant rises 3°C (5.4°F) above the targeted (set) temperature. The Digital Controller will automatically run on for three minutes (or to 10°C / 14°F below the set temperature) after engine shut down, eliminating ‘heat soak’ and extending engine life. The EWP80 Digital Controller Combo is supplied in a do-it-yourself kit with everything you need for fitment to your vehicle’s engine, including an easy-to-follow DIY instruction booklet.

The world’s most advanced total engine cooling management system:

 universal fit

 more power

 more cooling

 increase fuel efficiency

 extend engine life

 world-leading technology

lightweight Nylon

 EWP INSTALLATION OPTIONS

Installing an EWP as an AUXILIARY PUMP

• Leaving the mechanical water pump in place, install the EWP into the bottom radiator hose.
• Remove the thermostat and drill two approx. 3mm (1/8") holes in the thermostat plate to allow some coolant circulation when the thermostat is closed. Re-install ensuring that the thermostat housing is clean and a new gasket is used if required.

EWP INSTALLATION – disabling Mechanical water pump

• Leaving the mechanical water pump in place, install the EWP into the bottom radiator hose and remove the manufacturer’s thermostat.
• You will need to bypass the water pump pulley by installing an appropriate length belt (not supplied). This method makes for an easy installation.
• If running the pump continuously remove the thermostat and drill two approx. 3mm (1/8") holes in the thermostat plate to allow some coolant circulation. Re-install ensuring that the thermostat housing is clean and a new gasket is used if required.

In both these cases, the EWP will pump past the impeller of the mechanical water pump.

Disengaged mechanical water pump (recommended)

• Remove the mechanical water pump and remove the thermostat.
• Then remove the impeller from the mechanical pump shaft. Retain the mechanical water pump using the pump pulley as an idler to avoid re-routing the drive belt.

• Block any bypass passages and re-install the disengaged water pump ensuring that all gasket surfaces are clean and the new gaskets are properly fitted to prevent leaks.
• Install the EWP^Ò into the bottom radiator hose.

Removed mechanical water pump (Ideal)

• Remove the mechanical water pump and thermostat from the engine.
• Install a Davies Craig EWP Header Adaptor or blanking plate (not supplied). Ensuring the gasket surfaces are clean and the appropriate gasket or sealant is used to prevent leaks.
• Install the EWP into the bottom radiator hose. This method will require you to modify or replace the standard radiator hose.
• Install an appropriate length belt (not supplied) to drive the accessories.

In most cases EWP will be adequately supported by the radiator hose. Where mounting is required, the EWP must be soft mounted to protect against vibration. For the EWP115, EWP130 and EWP150 Part #8700 Mounting bracket is recommended.

Product Selection Guide
Application	Pump Model	Pump Kit		Pump Combo		Controller / Switch
		Part # 12 V	Part # 24 V	Part# 12 V	Part # 24 V	Part # 12 V	Part # 24 V
Motorbike up to 500cc (Standard)	EBP15	9001				0444 or 0455
Motorbike 500cc - 1000cc (Std)	EBP23	9050				0444 or 0455
Motorbike 1000cc - 2000cc (Std)	EBP25	9005				0444 or 0455
Vehicle Heater System (Standard)	EBP23	9050				0444 or 0455
LPG (Butane) System (Standard)	EBP23	9050				0444 or 0455
Intercooler (depending on capacity)	EBP23	9050
	EBP25	9005
	EBP40	9040	9041			0444 or 0455	0444 or 0455
	EWP80	8005		8907
Engines up to 2.0L (Standard)	EWP80	8005		8907		8002	8002
Engines up to 2.0L - 3.5L (Standard)	EWP115	8025 or 8040	8026 or 8041	Specifications SKU daviescraig-dc8005 Brand DAVIES CRAIG Shipping Weight 13.0000kg Shipping Width 0.500m Shipping Height 0.200m Shipping Length 0.250m More From This Category $54.54 or 4 payments of $13.63 with Info SKU: jrad-JWP0053 Jayrad Water Pump for Nova LG/Corolla AE101 4A-FE Add to Cart $897.95 or 4 payments of $224.49 with Info SKU: MEZ-WP101S Meziere Electric Water Pump for Chevy SB, 35GPM Standard Motor - Black Add to Cart $79.29 or 4 payments of $19.82 with Info SKU: jrad-JWP0180 Jayrad Water Pump for Golf MK7 GTI 13+/A1 A3 A4 A5 Q3 2.0L Add to Cart $43.63 or 4 payments of $10.91 with Info SKU: jrad-JWP0041 Jayrad Water Pump for Lancer/Mirage/Pajero IO/Proton Waja Add to Cart $73.01 or 4 payments of $18.25 with Info SKU: jrad-JWP006 Jayrad Water Pump for Landcruiser Add to Cart $1,190.00 or 4 payments of $297.50 with Info SKU: MEZ-WP119SHD Meziere Electric Water Pump for Chevy LS, 42GPM Heavy Duty Motor - Black Add to Cart $695.00 or 4 payments of $173.75 with Info SKU: MMRT-GRC-23MWBK Mishimoto 2023+ Toyota GR Corolla Expansion Tank Black Add to Cart $489.00 or 4 payments of $122.25 with Info SKU: daviescraig-dc8950 EWP115 Alloy Combo - 115LPM/30GPM Remote Electric Water Pump & Controller (8950) Add to Cart Subscribe to our newsletter CONTACT US Unit 12, 8-14, St Jude Crt, BROWN PLAIN , QLD, 4118, AU ( 61) 07 3800 8355 ABN: 58 134 888 154 Follow Us On : Encrypted Checkout CATEGORIES ACCESSORIES AERODYNAMICS BRAKES BOOKS & GIFT CLOTHING COOLING DRIVETRAIN ELECTRONICS ENGINE CATEGORIES EXHAUST FORCED INDUCTION HANDLING INTAKE INTERIOR LIGHTS OEM TYRES WHEELS INFORMATION Terms of Use Privacy Policy Returns Policy SERVICE My Account Track Order Resolution Centre ABOUT US About Us Contact Us Copyright © 2025 CJ MOTOR Contact Us Back to top × Shop Now. Pay Later. Always interest-free. Add your favourites to cart Select Afterpay at checkout Log into or create your Afterpay account, with instant approval decision Your purchase will be split into 4 payments, payable every 2 weeks All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase For complete terms visit afterpay.com/terms