SKU: daviescraig-dc8005

DAVIES CRAIG EWP80 Kit - 12V 80LPM/21GPM Remote Electric Water Pump (8005)

$255.00

or 4 payments of $63.75 with Info



In Stock


Calculate Shipping



Australia wide rate - $30.00 (ETA: 3 days)

Description

EWP80 Kit - 12V 80LPM/21GPM Remote Electric Water Pump (PART #8005)

The EWP80 is available for purchase in following options:

  • Pump Only (Part #8105) 
  • Kit (Part #8005)
  • Combo with Controller (Part #8907)

The EWP80 Electric Water Pump – simple, do-it-yourself, easy to install, designed to complement or replace your existing belt-driven, mechanical water pump. It will fit most vehicle makes and models fitted with naturally-aspirated or turbo engines up to two litres. The revolutionary, Australian-designed EWP80 is made from anti-corrosive, lightweight, heat-resistant, glass-filled nylon and incorporates a ceramic faced seal for long-life durability.


The EWP80 greatly enhances engine cooling control while giving you added power and improved fuel economy. By removing the parasitic power losses of a belt-driven, mechanical water pump the EWP can provide up to 10kW (13hp) of extra power and increased torque.

 

EWP80 KIT CONTENTS   
Description Quantity
EWP80 Pump 12V 1
EWP80 Hardware Bag 1
EWP Straight Adatpor 35mm 1
EWP L-Adaptors 35mm 1
EWP Adaptor O-Ring 2

Rubber Sleeve 3mm (Increase hose fitting size to 38mm)

*For larger hose size, you will need 6mm sleeves (Part #18511) which will increase adaptor to fit hose size 41~42mm *not in kit*

2
Hose Clamp  2
EWP Basic Pump Loom 1
EWP Universal Instructions 1

 

Technical Specifications
Voltage 12 Volt Pump
Operating voltage 3V DC to 15V DC
Maximum current 7.5A @ 13V
Flow rate (max) 80 L/min (21.13 US gal/min) @ 13V DC
Operating temp. -40° to 130°C  (-40° to 266°F)
Pump design Clockwise centrifugal with volute chamber
Pump weight 900 grams (2.0 lb)
Pump material Nylon 66, 30% glass-filled
Burst pressure 350 kPa (50 psi)
Seal Ceramic face seal
Self Priming No, none of our pumps are self-priming
Fits hose sizes 32mm to 51mm (1⅜” to 2”)

 

Combined with an LCD EWP/Fan Digital Controller (Sold separately Part #8002 or combo #8907) will manage both the EWP and Thermatic fan operation. The Digital Controller will vary the speed of the EWP in response to the engine’s coolant temperature. Multiple temperature settings are provided on the Controller for either maximum power or fuel efficiency. The Thermatic Fan/s will be activated automatically once the engine coolant rises 3°C (5.4°F) above the targeted (set) temperature. The Digital Controller will automatically run on for three minutes (or to 10°C / 14°F below the set temperature) after engine shut down, eliminating ‘heat soak’ and extending engine life. The EWP80 Digital Controller Combo is supplied in a do-it-yourself kit with everything you need for fitment to your vehicle’s engine, including an easy-to-follow DIY instruction booklet.

The world’s most advanced total engine cooling management system:


 universal fit

 more power

 more cooling

 increase fuel efficiency

 extend engine life

 world-leading technology

lightweight Nylon

 EWP INSTALLATION OPTIONS

Installing an EWP as an AUXILIARY PUMP

  • Leaving the mechanical water pump in place, install the EWP into the bottom radiator hose.
  • Remove the thermostat and drill two approx. 3mm (1/8") holes in the thermostat plate to allow some coolant circulation when the thermostat is closed. Re-install ensuring that the thermostat housing is clean and a new gasket is used if required.

EWP INSTALLATION – disabling Mechanical water pump

  • Leaving the mechanical water pump in place, install the EWP into the bottom radiator hose and remove the manufacturer’s thermostat.
  • You will need to bypass the water pump pulley by installing an appropriate length belt (not supplied). This method makes for an easy installation.
  • If running the pump continuously remove the thermostat and drill two approx. 3mm (1/8") holes in the thermostat plate to allow some coolant circulation. Re-install ensuring that the thermostat housing is clean and a new gasket is used if required.

In both these cases, the EWP will pump past the impeller of the mechanical water pump.

Disengaged mechanical water pump (recommended)

  • Remove the mechanical water pump and remove the thermostat.
  • Then remove the impeller from the mechanical pump shaft. Retain the mechanical water pump using the pump pulley as an idler to avoid re-routing the drive belt.
  • Block any bypass passages and re-install the disengaged water pump ensuring that all gasket surfaces are clean and the new gaskets are properly fitted to prevent leaks.
  • Install the EWPÒ into the bottom radiator hose.

Removed mechanical water pump (Ideal)

  • Remove the mechanical water pump and thermostat from the engine.
  • Install a Davies Craig EWP Header Adaptor or blanking plate (not supplied). Ensuring the gasket surfaces are clean and the appropriate gasket or sealant is used to prevent leaks.
  • Install the EWP into the bottom radiator hose. This method will require you to modify or replace the standard radiator hose.
  • Install an appropriate length belt (not supplied) to drive the accessories.

In most cases EWP will be adequately supported by the radiator hose. Where mounting is required, the EWP must be soft mounted to protect against vibration. For the EWP115, EWP130 and EWP150 Part #8700 Mounting bracket is recommended.

 

Product Selection Guide

Application Pump Model Pump Kit Pump Combo Controller / Switch
Part #
12 V
Part #
24 V
Part#
12 V
Part #
24 V
Part #
12 V
Part #
24 V
Motorbike up to 500cc (Standard) EBP15 9001       0444 or 0455  
Motorbike 500cc - 1000cc (Std) EBP23 9050       0444 or 0455  
Motorbike 1000cc - 2000cc (Std) EBP25 9005       0444 or 0455  
Vehicle Heater System (Standard) EBP23 9050       0444 or 0455  
LPG (Butane) System (Standard) EBP23 9050       0444 or 0455  
Intercooler
(depending on capacity)
EBP23 9050          
EBP25 9005          
EBP40 9040 9041     0444 or 0455 0444 or 0455
EWP80 8005   8907      
Engines up to 2.0L (Standard) EWP80 8005   8907   8002 8002
Engines up to 2.0L - 3.5L (Standard) EWP115 8025 or
8040
8026 or
8041
SKU daviescraig-dc8005
Brand DAVIES CRAIG
Shipping Weight 13.0000kg
Shipping Width 0.500m
Shipping Height 0.200m
Shipping Length 0.250m

More From This Category


$2.90

or 4 payments of $0.72 with Info

SKU: daviescraig-dc18511

DAVIES CRAIG 6mm Rubber Adaptor Sleeve (18511)

$195.95

or 4 payments of $48.99 with Info

SKU: MEZ-WP112C

Meziere Electric Water Pump Backing Plate for FORD SB Early - Chrome

$69.38

or 4 payments of $17.34 with Info

SKU: jrad-JWP0034

Jayrad Water Pump for ES300/Camry/Kluger

$95.94

or 4 payments of $23.98 with Info

SKU: killerb-WPHK

Killer B High Flow Water Pump Housing Install Kit for Subaru WRX/STI/FXT/LGT (EJ20/EJ25)

$253.00

or 4 payments of $63.25 with Info

SKU: daviescraig-dc8180

DAVIES CRAIG EWP130 - 12V 141LPM/37GPM Remote Electric Water Pump (8180)

$118.93

or 4 payments of $29.73 with Info

SKU: jrad-JWP0159

Jayrad Water Pump for Navara D23 NP300 2.3L Diesel

$63.46

or 4 payments of $15.87 with Info

SKU: jrad-JWP0038

Jayrad Water Pump for Corolla ZRE152-182/Rav4

$94.17

or 4 payments of $23.54 with Info

SKU: jrad-JWP0124

Jayrad Water Pump for Patrol 4.5L Y61 97-01

$990.00

or 4 payments of $247.50 with Info

SKU: MEZ-WP119RHD

Meziere Electric Water Pump for Chevy LS, 42GPM Heavy Duty Motor - Red

$219.97

or 4 payments of $54.99 with Info

SKU: jrad-JWP0017

Jayrad Water Pump for Patrol GU/Y61 3.0L 07-16

$68.35

or 4 payments of $17.09 with Info

SKU: jrad-JWP001

Jayrad Water Pump for Falcon EF-BA 4.0L 03+ - With Pulley

$743.95

or 4 payments of $185.99 with Info

SKU: MEZ-WP111B

Meziere Electric Water Pump for Ford, 35GPM Standard Motor - Blue

$87.22

or 4 payments of $21.80 with Info

SKU: jrad-JWP0144

Jayrad Water Pump for Accord CP Euro CU 2.4L 08-15

$1,089.95

or 4 payments of $272.49 with Info

SKU: MEZ-FPS085

Meziere Billet SFI Approved LS Flex Plate, 168 Tooth Heavy Duty

$54.54

or 4 payments of $13.63 with Info

SKU: jrad-JWP0053

Jayrad Water Pump for Nova LG/Corolla AE101 4A-FE

$379.95

or 4 payments of $94.99 with Info

SKU: RCM3233

RCM Black Series Water Pump and Seal Kit w/70 Deg Thermostat for Subaru WRX/STI (EJ20/EJ25)

$459.00

or 4 payments of $114.75 with Info

SKU: daviescraig-dc8907

EWP80 Combo - 80LPM/21GPM Remote Electric Water Pump & Controller Combo (8907)

$83.05

or 4 payments of $20.76 with Info

SKU: jrad-JWP0042

Jayrad Water Pump for Lancer/Grandis/Outlander/RVR

$230.00

or 4 payments of $57.50 with Info

SKU: daviescraig-dc8126

DAVIES CRAIG EWP115 Nylon - 24V 115LPM/30GPM Remote Electric Water Pump (8126)

$97.24

or 4 payments of $24.31 with Info

SKU: jrad-JWP0051

Jayrad Water Pump for Rodeo RA/Colorado RC/D-Max

Stay Updated

Secure Payment Options

Encrypted Checkout

Comodo Secure