Note: RHD Model replaces right-hand side boost gauge

Your Fiat Abarth 595 is missing a data display! Want to keep an eye on what's happening with your Fiat Abarth 595?? The CANchecked MFD15 plugs seamlessly into your Fiat and displays ECU data on its OLED display. The Fiat Abarth 595 kit comes with a vehicle-specific cover and fits into the interior like an original part. It replaces the original boost pressure gauge and nothing needs to be cut or drilled. The sensors are queried via OBD2. We have optimized the protocol to achieve maximum query speed.

The MFD15 Gen2 is CANcheck's newest and most versatile display and has revolutionised and rethought what is possible in the standard 52mm gauge form factor. The MFD15 is a CANbus compatible device which is able to read information from most 2008-onwards vehicles by simply plugging into your vehicles OBDII port. CANbus is currently how newer vehicles send and receive data. Think of it as a USB port on a computer; whatever is plugged into a USB port can be opened and accessed from your computer. If your CANbus ECU has sensors plugged in, then in most cases plugging a CANchecked display will read it* (see below for more information). Don't have a CANbus ECU in your car? No problem! The MFD15 can accept 6 additional inputs* (*license required) including Flex Fuel sensors directly to the gauge. No ECA module required.

The MFD15 however is more than just a gauge. It is also a data logging tool, a CAN sensor hub, a CAN control switch* (*license required, aftermarket ECUs only), a shift light and a warning light! Read below for a full list of features. Due to the small 52mm form factor the MFD15 can be mounted almost anywhere. To assist with installation however CANchecked off a range of direct-fit gauge bezels which allow bolt-in installation of the MFD15 display with a a look so clean it looks factory. 

The MFD15 can be configured easily to display certain ECU values with a range of pre-made screen designs. This can be set up via PC or now with a WLAN connection from your phone directly to the MFD15. With an additional license data logging can be saved directly to your mobile device.

The CANchecked MFD15 is one of the best ways to monitor and enjoy your vehicle.

The following sensors can be queried:

• Speed ??(RPM)
• Engine load (Load)
• Fuel Pressure (FuelPressure)
• Boost Pressure (MAP)
• Vehicle Speed (Speed)
• Ignition Angle (IgnAng)
• Intake temperature (IAT)
• Air Mass (MAF)
• Oil temperature (OilTemp)
• Water temperature (CLT)
• Lambda
• Cat temperature bank1 sensor 1 (CatTemp1)