SKU: HS06LISMIP

Invidia Mid Pipe for Lexus IS250 GSE20R/IS350 GSE21R 05-13

MID PIPES

$999.00

or 4 payments of $249.75 with Info



In Stock


Calculate Shipping



Australia wide rate - $65.00

Description

Item: Invidia Mid Pipe for Lexus IS250 GSE20R/IS350 GSE21R 05-13

INVIDIA MID PIPE

From start to finish the Invidia Exhaust Systems are designed with performance in mind with the exhaust route carefully selected to ensure minimal bends, allowing for an unobstructed exit of exhaust gases with minimal restrictions and turbulence. This will allow for improvements in both horsepower and torque, along with improvements in throttle response with a reduction in turbo lag for turbocharged vehicles. Additionally, you get the reward of an aggressive exhaust note.

 

INVIDIA PERFORMANCE

Far more engineering goes in to the design of an exhaust system than many realise. From a performance perspective, there is a fine balance between exhaust back pressure and exhaust gas velocity. Too large a diameter pipe, and low down power and torque is sacrificed (particularly on naturally aspirated cars), too small a diameter or added restrictions and bottle necks in the system, and the engine is unable to push gasses out of the combustion chamber efficiently, reducing power and torque. There are many other technical aspects such as "scavenging effect" which are beyond the scope of this document, but the point is, it's not as simple as just strap on a drain pipe and gains for days. A "quality" exhaust system maximizes performance gains by design.

Invidia High Performance employ a team of engineers and conduct thorough research and development for every single exhaust component they manufacture, ensuring performance to match the customer's needs in every instance, including the use of the highest quality High Flow Catalytic Converters where applicable.

 

INVIDIA SOUND

What an exhaust sounds like is typically the number one factor when choosing a system. The acoustics of an exhaust system are hugely complex. Many people believe that all an exhaust does is muffle the natural tone of the engine, but in the vast majority of cases this is far from the truth, in fact companies like Ferrari, Lamborghini, Pagani, Porsche and alike all spend massive amounts of time and money "fine tuning" their exhaust systems to sound exactly how they want them to. Put a straight pipe on just about any hypercar and that distinctive engine note is lost.

Tuning the sound of an exhaust system adds an additional layer of complexity to the performance aspect of the design process. The goal is to design a system that sounds great, without adversely affecting performance. Invidia spend countless hours on research and development, including listening to customer feedback in order to fine tune their systems to suit the target market for each model from the quieter Q300 to the Race orientated G5 Titan, so you can be assured your car sounds its absolute best, without sacrificing performance.

 

INVIDIA CONSTRUCTION

The final piece of the puzzle is perhaps the most important of all. you don't have to be an expert to realise that all the research and development in the world means nothing if the final product is built with sub-standard materials, using sub-standard manufacturing techniques. From the very beginning, Invidia employ state of the art manufacturing techniques to ensure form, fit and finish are all on point.

 First, a 3D scan is take of the underside of the car to ensure fitment is 100% correct.  Next, grade 304 Stainless Steel  (with the exception of their titanium systems of course) is selected for all piping, mufflers and flanges. This particular grade is chosen for its strength, durability (ability to withstand the elements),  and its ability to be formed and welded with relative consistency and ease. Cast flanges are then used which ensures 100% correct fitment every time, no leaks or additional stress points, and long lasting strength.    , an

Finally, robotic welding machines are used to ensure every single weld is uniform and precise, not only adding a huge amount of strength, but also removing manufacturing variances which are unavoidable when doing a task by hand. This means every system that rolls off the production line is just about as identical as possible. All built to the same incredible high standard. Did we mention it also looks absolutely awesome?  

  

   INVIDIA LIFETIME WARRANTY

Buy with confidence! Invidia Exhausts Australia's LIFETIME WARRANTY applies to this product. Invidia Exhausts Australia warrants all of its products with a limited lifetime warranty policy. Lifetime Warranty covers:

  • Structural welds
  • Mufflers and internals
  • Cracks
  • Manufacture defects

Lifetime Warranty does not cover:

  • Catalytic Convertors (2 Years warranty)
  • Logo or Invidia Badge falling off
  • Scrapes or scrubbing
  • Crashes/Vehicle Accidents

Terms and conditions apply.

(HS06LISMIP)

About Invidia

PERFORMANCE

Far more engineering goes in to the design of an exhaust system than many realise. From a performance perspective, there is a fine balance between exhaust back pressure and exhaust gas velocity. Too large a diameter pipe, and low down power and torque is sacrificed (particularly on naturally aspirated cars), too small a diameter or added restrictions and bottle necks in the system, and the engine is unable to push gasses out of the combustion chamber efficiently, reducing power and torque. There are many other technical aspects such as "scavenging effect" which are beyond the scope of this document, but the point is, it's not as simple as just strap on a drain pipe and gains for days. A "quality" exhaust system maximizes performance gains by design.

Invidia High Performance employ a team of engineers and conduct thorough research and development for every single exhaust component they manufacture, ensuring performance to match the customer's needs in every instance, including the use of the highest quality High Flow Catalytic Converters where applicable.


SOUND

What an exhaust sounds like is typically the number one factor when choosing a system. The acoustics of an exhaust system are hugely complex. Many people believe that all an exhaust does is muffle the natural tone of the engine, but in the vast majority of cases this is far from the truth, in fact companies like Ferrari, Lamborghini, Pagani, Porsche and alike all spend massive amounts of time and money "fine tuning" their exhaust systems to sound exactly how they want them to. Put a straight pipe on just about any hypercar and that distinctive engine note is lost.

Tuning the sound of an exhaust system adds an additional layer of complexity to the performance aspect of the design process. The goal is to design a system that sounds great, without adversely affecting performance. Invidia spend countless hours on research and development, including listening to customer feedback in order to fine tune their systems to suit the target market for each model from the quieter Q300 to the Race orientated G5 Titan, so you can be assured your car sounds its absolute best, without sacrificing performance.


CONSTRUCTION

The final piece of the puzzle is perhaps the most important of all. you don't have to be an expert to realise that all the research and development in the world means nothing if the final product is built with sub-standard materials, using sub-standard manufacturing techniques.

Invidia take a huge amount of pride in the final product and in Australia, their Stainless Steel systems are backed with a lifetime warranty*, which speaks for itself.

So what are the differences? For starters, Invidia use Grade 304 Stainless Steel (with the exception of their titanium systems of course). This particular grade is chosen for its strength, durability (ability to withstand the elements), as well as it's ability to be formed and welded with relative consistency and ease.

From the very beginning, Invidia employ state of the art manufacturing techniques to ensure form, fit and finish are all on point. A 3D scan is take of the underside of the car to ensure fitment is 100% correct. Cast flanges are used in the construction which ensure 100% correct fitment every time, with no leaks or additional stress points.

Specifications

SKU HS06LISMIP
Brand INVIDIA
Shipping Weight 50.0000kg
Shipping Width 0.800m
Shipping Height 0.300m
Shipping Length 0.400m

More From This Category


$33.00

or 4 payments of $8.25 with Info

SKU: xf-TR250-300-S

XForce 2.5in to 3in Transition Pipe - Stainless Steel TR250-300-S

$4,440.00

SKU: TM-TB6090-TY06A

TOMEI EXPREME TITANIUM TYPE R CATBACK FOR MK5 A90 GR SUPRA

$79.00

or 4 payments of $19.75 with Info

SKU: xf-XP02-300-409

XForce XP02-300(409) 409 Stainless Steel Twin 3" X-Pipe XP02-300-409

$765.00

or 4 payments of $191.25 with Info

SKU: 431005

TOMEI EXPREME Ti TITANIUM CAT STRAIGHT PIPE for 86/BRZ/FR-S

$1,495.00

or 4 payments of $373.75 with Info

SKU: hks-33004-AN001

HKS CENTER PIPE For NISSAN SKYLINE COUPE UA- CBA-CPV35 VQ35DE 33004-AN001

$300.00

or 4 payments of $75.00 with Info

SKU: S2X92G3LA001T

AVO Cast Nickel-Iron Bellhousing for AVO Downpipes - TD04/TD05L

$639.00

or 4 payments of $159.75 with Info

SKU: 431001

TOMEI EXPREME Ti TITANIUM CAT STRAIGHT PIPE for EVO10 4B11

$860.00

or 4 payments of $215.00 with Info

SKU: xf-E4-HV21-2-CBS

2.5in Cat-Back X-Pipe System with Straight Pipe Rear - Raw 409 Stainless Steel

$445.00

or 4 payments of $111.25 with Info

SKU: xf-ES-HY30N-C

XForce 3in Centre Pipe - Non-Polished Stainless for (i30N 2017+) ES-HY30N-C

$1,499.00

or 4 payments of $374.75 with Info

SKU: PSR-A45-DPR

PSR Catless Race Down Pipe for Mercedes A45/CLA45/GLA45 AMG

$122.00

or 4 payments of $30.50 with Info

SKU: xf-XP02S-300

XForce X-Pipe Twin 3in - Stainless Steel XP02S-300

$899.00

or 4 payments of $224.75 with Info

SKU: xf-E4-FX02-KITB

XForce 3" Downpipe and Cat Kit - Stainless Steel (Focus XR5 06-11)

$28.95

or 4 payments of $7.24 with Info

SKU: xf-CL2S-200-250

XForce Merge Pipe from Twin 2in to Single 2.5in - Stainless Steel

$180.00

or 4 payments of $45.00 with Info

SKU: xf-ES-VW08-RDP

XForce Resonator Delete Pipe In Factory Standard Sizing ES-VW08-RDP

$462.26

or 4 payments of $115.56 with Info

SKU: TB6100-HN04A

TOMEI EXPREME Ti FULL TITANIUM CAT STRAIGHT PIPE for S2000 AP1/AP2

$620.00

or 4 payments of $155.00 with Info

SKU: S1B10M3LAMETT

AVO 3" Stainless Steel Downpipe FOR Liberty GT 2010

$1,150.00

or 4 payments of $287.50 with Info

SKU: S2D06M3NA003T

AVO Ceramic Coated Equal Length Headers & Up Pipe with Flex (EJ25

$28.95

or 4 payments of $7.24 with Info

SKU: xf-CL2M-200-250

XForce Merge Pipe from Twin 2in to Single 2.5in - Mild Steel CL2M-200-250

$880.00

or 4 payments of $220.00 with Info

SKU: S2D04G3GAMETJ

AVO 3" Stainless Steel Downpipe w/Twin Scroll Outlet FOR (JDM Sti)

$799.00

or 4 payments of $199.75 with Info

SKU: mst-BW-5803DP

Catless Downpipe for BMW / Toyota B58 3.0T (BW-5803DP)

Stay Updated

Secure Payment Options

Encrypted Checkout

Comodo Secure