header Menu
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 4 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 4 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 4 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 4 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 4 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 4 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 4 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 4 Port Black PTFE Stainless Steel Braid
SKU: pf-PFE662-LSKIT4

Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 4 Port Black PTFE Stainless Steel Braid

PROFLOW

$328.00

or 4 payments of $82.00 with Info



In Stock


Calculate Shipping


Australia wide rate - $45.00


item: Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 4 Port Black PTFE Stainless Steel Braid

Proflow's LS water cross over kits eliminate trapped air and steam from your cylinder heads, preventing hot spots and overheating. This can cause head gasket failures, lean cylinders and pre-ignition. They connect to the vent ports on each corner of the cylinder heads (2 port or 4 ports options available), which is then routed to either the radiator or water pump. This kit includes stainless steel PTFE black braided hose and the appropriate fittings and distribution blocks for a simple installation. They also offer a more attractive look than the OE rigid hard lines and provide flexibility when using aftermarket intakes and other accessories on performance LS vehicles. Will not suit factory intake (requires 20mm of clearance under the manifold). 

Suits the following engines:

  • LS1/LS6
  • LS2/LS3/L76/L77/L98

Proflow's LS water cross over kits eliminate trapped air and steam from your cylinder heads, preventing hot spots and overheating. This can cause head gasket failures, lean cylinders and pre-ignition. They connect to the vent ports on each corner of the cylinder heads (2 port or 4 ports options available), which is then routed to either the radiator or water pump. This kit includes stainless steel PTFE black braided hose and the appropriate fittings and distribution blocks for a simple installation. They also offer a more attractive look than the OE rigid hard lines and provide flexibility when using aftermarket intakes and other accessories on performance LS vehicles. Will not suit factory intake (requires 20mm of clearance under the manifold). 

Suits the following engines:

  • LS1/LS6
  • LS2/LS3/L76/L77/L98

SKU pf-PFE662-LSKIT4
Brand PROFLOW
Shipping Weight 25.0000kg
Shipping Width 0.400m
Shipping Height 0.300m
Shipping Length 0.400m

More From This Category


$72.89

or 4 payments of $18.22 with Info

SKU: pf-PFE930-16-16R

Proflow Fitting Aluminium AN Y-Adaptor -16AN Male To -16AN Male x 2 Red

$64.66

or 4 payments of $16.16 with Info

SKU: CPS-148

Raceworks LSA O2 Extension Loom CPS-148

$17.79

or 4 payments of $4.45 with Info

SKU: RWF-131-06BK

Raceworks Female To Female Swivel Straight Straight RWF-131-06BK

$45.79

or 4 payments of $11.45 with Info

SKU: pf-PFE133-12BK

Proflow 90 Degree Female Flare Union Swivel Hose End -12AN Black

$51.06

or 4 payments of $12.77 with Info

SKU: RWF-108-12BK

Raceworks Cutter Hose Fitting Straight 60 Degree RWF-108-12BK

$41.99

or 4 payments of $10.50 with Info

SKU: SHE-045-400BE

Raceworks 23 Degree Silicone Elbow 4'' (102mm) Blue 45 Degree SHE-045-400BE

$9.35

or 4 payments of $2.34 with Info

SKU: pf-PFE790-08-05

Proflow Fitting adaptor AN 8 Male Hose End To 5/16in. Barb Blue

$12.84

or 4 payments of $3.21 with Info

SKU: pf-PFE841-04BK

Proflow 1/4in. Barb Male Fitting To 1/8in. NPT Black

Contact Us