header Menu
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 2 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 2 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 2 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 2 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 2 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 2 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 2 Port Black PTFE Stainless Steel Braid
Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 2 Port Black PTFE Stainless Steel Braid
SKU: pf-PFE662-LSKIT2

Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 2 Port Black PTFE Stainless Steel Braid

PROFLOW

$187.98

or 4 payments of $46.99 with Info



In Stock


Calculate Shipping


Australia wide rate - $30.00 (ETA: 3 days)


item: Proflow Engine Steam Line Vent Kit Holden Commodore LS1/LS2/LS3 2 Port Black PTFE Stainless Steel Braid

Proflow's LS water cross over kits eliminate trapped air and steam from your cylinder heads, preventing hot spots and overheating. This can cause head gasket failures, lean cylinders and pre-ignition. They connect to the vent ports on each corner of the cylinder heads (2 port or 4 ports options available), which is then routed to either the radiator or water pump. This kit includes stainless steel PTFE black braided hose and the appropriate fittings and distribution blocks for a simple installation. They also offer a more attractive look than the OE rigid hard lines and provide flexibility when using aftermarket intakes and other accessories on performance LS vehicles.

Suits the following engines:

  • LS1/LS6
  • LS2/LS3/L76/L77/L98
  • LSA

Proflow's LS water cross over kits eliminate trapped air and steam from your cylinder heads, preventing hot spots and overheating. This can cause head gasket failures, lean cylinders and pre-ignition. They connect to the vent ports on each corner of the cylinder heads (2 port or 4 ports options available), which is then routed to either the radiator or water pump. This kit includes stainless steel PTFE black braided hose and the appropriate fittings and distribution blocks for a simple installation. They also offer a more attractive look than the OE rigid hard lines and provide flexibility when using aftermarket intakes and other accessories on performance LS vehicles.

Suits the following engines:

  • LS1/LS6
  • LS2/LS3/L76/L77/L98
  • LSA

SKU pf-PFE662-LSKIT2
Brand PROFLOW
Shipping Weight 12.0000kg
Shipping Width 0.300m
Shipping Height 0.300m
Shipping Length 0.300m

More From This Category


$749.95

or 4 payments of $187.49 with Info

SKU: PSR-RWH-363

PSR/Raceworks Parallel Fuel Rail Kit Suit 6AN FPR w/Teflon Hose GFB FX-R PSR-RWH-363

$12.84

or 4 payments of $3.21 with Info

SKU: pf-PFE827-08

Proflow Male Flare Union Adaptor -08AN 45 Degree Union Blue

$16.23

or 4 payments of $4.06 with Info

SKU: pf-PFE522-08BK

Proflow 90 Degree 3/8in. NPT To Male -08AN Flare to NPT Adaptor Black

$50.80

or 4 payments of $12.70 with Info

SKU: pf-PFE142-12

Proflow 45 Degree Male Adaptor - Female Adaptor Swivel Coupler Hose End -12AN Blue

$23.28

or 4 payments of $5.82 with Info

SKU: CPS-151

Raceworks Plug and Pin Kit Suit OPS-131 Dual Pressure/Temp Sensor CPS-151

$8.23

or 4 payments of $2.06 with Info

SKU: RWF-320-04SS

Raceworks Stainless Steel Bulkhead AN-4 RWF-320-04SS

$9.99

or 4 payments of $2.50 with Info

SKU: ALY-048BK

Raceworks Injector Extension 3/4 to Full Length 14mm-14mm ALY-048BK

$41.01

or 4 payments of $10.25 with Info

SKU: RWF-144-12BK

Raceworks Tee - Swivel On Branch AN-12 RWF-144-12BK

Contact Us