CIRCO M119 Compound: Carbon Metallic Friction: 0.48-0.51µ Temp: 50-800°c High friction levels even at cold temperatures
High temperate ability – up to 800degC
Suitable for club rally to WRC!
Excellent modulation for driver control
Low fade characteristics for long stages CIRCO M119 is a specially formulated brake pad for Rally and Circuit racing use. M119 has an easy bed-in procedure and offers confidence inspiring levels of low temperature friction. The compound has been rigorously tested in top level machinery including WRC, TCR, GT4, GpN as well as historic rally and race cars. M119 displays excellent resistance to fade and is the market leader for driver modulation and control. The other benefit of M119 is the very low wear rate which makes this pad very popular in many circuit endurance racing categories. M119 is a more ‘user friendly’ option over CIRCO M127. What you get:
1 part number = 1 set of pads. In most cases this is 4 pads per box. If your calipers take more than 2 pads per caliper (E.g Audi RS4), the part number you buy will include all the pads you need to service the axle set of calipers. Also included is bedding instructions to help you get the most out of your new pads. Brake pad product notes: Shims and Wear sensors Our brake pad products are designed for high performance and competition use. Therefore, we do not always provide ancillary parts such as wear sensors or anti-squeal shims on some of the WinmaX and CIRCO range. Ancillary parts are provided in some cases depending on the pad specification and fitment. Anti-Squeal shims are available for some shapes as separate items on this website. If you are unsure about any of this, please contact the us for confirmation. Fitment FRONT, REAR or UNIVERSAL? Our brake pad products are engineered to replace OEM parts with higher performance friction. Many pad shapes are designed to be installed in only front or rear. However, there are many pad shapes in the automotive world that are shared across multiple vehicle and caliper makes and models. In many cases these shapes are installed in the front on one vehicle, but the same shape is used in the rear of another. In other cases, the same pad shape is used in both front AND rear. If a brake pad is known to be used for front and/or rear, we refer to it as UNIVERSAL. If unsure about the fitment when purchasing, please check with us.