SKU: radium-20-0097

Radium Catch Can Kit, S2000, All RHD and 06-09 LHD, Crankcase

20-0097

$459.94

or 4 payments of $114.98 with Info



In Stock


Calculate Shipping



Australia wide rate - $30.00 (ETA: 3 days)

Description

Item: Radium Catch Can Kit, S2000, All RHD and 06-09 LHD, Crankcase

Description 

This installation kit was specifically designed for the 00-09 RHD and 06-09 LHD Honda S2000. It is not compatible with 00-05 Honda S2000 LHD models unless the cruise control module is removed. Instead, please go to the  product page. 

An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil saturated air circulating back into the air intake stream can lead to degraded performance. Read about all the benefits and functionality of the Radium Engineering's popular catch cans here:

Features:
-Effectively raises the octane and increased engine performance from cleaner inlet air 
-Prevents oil buildup in the intake or intercooler system walls, throttle body, intake manifold, etc. 
-Excessive oil collection can be an indicator of a damaged engine.
-Lowers hydrocarbon emissions 
-Capacity: 6 fluid ounces 
-Height (without fittings): 5 inches 
-Outside Diameter: 2.45 inches 


S2000 CATCH CAN KIT OPTIONS
Radium Engineering offers two independent S2000 oil catch can kits that are sold individually or together. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems route clean filtered air back in through the engine to be burned and to promote negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering into the cabin.

The 20-0097 Crankcase Catch Can Kit runs inline with the 1/2" valve cover breather port. At low loads it experiences atmospheric pressure, but when the engine is at high load (WOT), this hose will experience vacuum and would normally be drawing unwanted crankcase vapors, unspent fuel, and oil sludge into the air filter intake pipe. If the engine is turbocharged or supercharged and you are finding oil accumulation stuck in the intercooler, this catch can is a necessity as oil will lower the thermal efficiency properties of the heat exchange process.

The 20-0098 PCV Catch Can Kit comes with 2 mounting brackets. One bracket will be disregarded depending if the crankcase vent kit will also be used. This catch can runs inline with the 3/8" PCV (positive crankcase ventilation) valve. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV "check" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hose will experience "metered" vacuum when the engine is idling, low load cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. Note: Because the Radium catch cans are pressure sealed, they are great for boosted applications as well so connecting to the intake manifold is permitted.
 
For the ultimate in engine protection, Radium recommends the S2000 20-0099 Dual Catch Can Kit (shown below) which utilizes both the "Crankcase" catch can and "PCV" catch can.



20-0097 Crankcase Kit Includes:
-Radium billet oil catch can with integrated condenser and dipstick
-Radium S2000-specific laser cut powder coated mounting bracket
-Anodized aluminum 8AN hose ends and adapter fittings
-Enough 1/2" PCV rubber hose to mate to custom applications 
-Vacuum and heater hose to eliminate OEM metal hard tube loom 
-Stainless steel mounting hardware 

20-0098 PCV Kit Includes:
-Radium billet oil catch can with integrated condenser and dipstick
-Radium S2000-specific laser cut powder coated mounting bracket
-Radium universal laser cut powder coated mounting bracket
-Anodized aluminum -6AN hose ends 
-Anodized 6AN adapter fittings  
-Stainless steel mounting hardware
-OEM spring hose clamps 
-3/8" PCV rubber hose  

 

Specifications

SKU radium-20-0097
Brand RADIUM
Shipping Weight 10.0000kg
Shipping Width 0.400m
Shipping Height 0.200m
Shipping Length 0.300m

More From This Category


$41.95

or 4 payments of $10.49 with Info

SKU: DW-6-02-0821

Deatschwerks Titanium 30 Deg 8AN Female Flare Swivel CPE Hose End

$24.99

or 4 payments of $6.25 with Info

SKU: sakura-FC-1503

Sakura FC-1503 Fuel filter - FC-1503

$1,439.95

or 4 payments of $359.99 with Info

SKU: DW-16MX-21-1200-6

Deatschwerks 1200cc/min Bosch EV14 Injectors - 6 Pack (Mustang V6 05-15)

$117.71

or 4 payments of $29.43 with Info

SKU: GOSS-GE209

GOSS Electric Fuel Pump (GE209)

$57.22

or 4 payments of $14.30 with Info

SKU: WCF129

WESFIL FUEL FILTER - WCF129

$437.80

or 4 payments of $109.45 with Info

SKU: id-1300.34.14.14

ID1300-XDS Injector Single, 34mm Length, 14mm Top O-Ring, 14mm Lower O-Ring

$600.91

or 4 payments of $150.23 with Info

SKU: DW-42M-02-1200-4

Deatschwerks 1200cc/min Low Impedance Injectors - 4 Pack (Evo 8-9 03-06)

$78.86

or 4 payments of $19.71 with Info

SKU: WZ541

WESFIL FUEL FILTER - WZ541

$1,454.95

or 4 payments of $363.74 with Info

SKU: DW-17MX-00-0600-8

Deatschwerks 600cc/min Injectors - 8 Pack (BMW M5 00-03/M3 08-13)

$289.95

or 4 payments of $72.49 with Info

SKU: DW-7-500

Deatschwerks Fuel Rails (Mitsubishi EVO X)

$459.94

or 4 payments of $114.98 with Info

SKU: radium-20-0469

Radium Fuel Rail Plumbing Kit - Nissan 350Z 07-09/370Z/Skyline V36/Infiniti G35/G36 V36 (VQ35HR/VQ37

$69.83

or 4 payments of $17.46 with Info

SKU: aeromotive-16701

AEROMOTIVE Walbro Harness Electrical Adapter(16701)

$1,844.95

or 4 payments of $461.24 with Info

SKU: DW-16MX-00-1200-8

Deatschwerks 1200cc/min Bosch EV14 40mm Compact Injectors - 8 Pack

$226.56

or 4 payments of $56.64 with Info

SKU: GOSS-G7772

GOSS Mechanical Fuel Pump (G7772)

$207.90

or 4 payments of $51.98 with Info

SKU: F90000267PUMPONLY

WALBRO 460LPH E85 IN-TANK FUEL PUMP (0NLY)

$127.84

or 4 payments of $31.96 with Info

SKU: pf-PFEFS303B-10

Proflow Fuel Filter Inline Mount Billet Aluminium Black Anodised 10 Microns 90mm length -8 AN Inlet/

$33.95

or 4 payments of $8.49 with Info

SKU: aeromotive-12640

AEROMOTIVE Replacement Strainer(12640)

$42.99

or 4 payments of $10.75 with Info

SKU: sakura-FS-1123

Sakura FS-1123 Fuel filter - FS-1123

Stay Updated

Secure Payment Options

Encrypted Checkout

Comodo Secure