Item: Deatschwerks DW65V Fuel Pump for VW 1.8T AWD
Part number: 9-655-1025-FPHKW
DeatschWerks has expanded its fuel pump range to now cover Volkswagen and Audi 1.8t applications. Brand new for 2014, the DW65v fuel pump is the companyÔÇÖs first application-specific fuel pump for the European market.
The DW65v fills a need for a pump that fits like stock, but flows enough to support the higher power ranges the 1.8t is capable of. Solutions up until now were either pumps that supported only limited power levels or pumps that required messy, complicated installation.
Some popular 1.8t applications for the FWD DW65v are the VW Jetta, Beetle, Passat, and Golf. This also extents to the Audi 1.8t FWD models like the A4, A6, and TT. The AWD DW65v fits the MK4 and MK5 R32 Golf. As well as the Audi MK1 S3, MK2 S3, Mk1 and MK2 TT.
On top of the New AWD applications, the DW65v FWD version has also been confirmed to be a drop-in replacement for the Low Pressure Fuel Pump on the 2.0 TSI and 2.0 FSI model cars, including the MK2 Audi TT.
Like the rest of DeatschWerksÔÇÖ DW65 pump series (DW65c and DW65a), this ÔÇ£vÔÇØ version flows 265lph and can support 500hp. The DW65 series of pumps are characterized by their specialty fitment, allowing 100% drop-in fitment for applications that donÔÇÖt take a standard-size fuel pump. The DW65v has the same pick up points as the factory pump and utilizes a system identical to stock to maintain the bucketÔÇÖs fuel level, avoiding fuel starvation at low fuel levels or in high cornering. All DeatschWerks fuel pumps come with an industry-leading 3-year warranty.
|2.0 TSI TFSI||FWD||9-654-1025|
- Drop in fitment
- Supports up to 500hp
- 265 LPH DW65v flows 40% more than the TT225
- Eliminates fuel starvation issues caused by other high-flow pumps
- No wiring needed / Connector matches factory
- 3-year no-fault warranty
- Quiet and reliable turbine impeller
Fuel Pump Technical Information
to learn more about the DW65v in-tank fuel pump along with flow data and specifications.
Hard Wire Kit Option:
Get the most out of your new high flow fuel pump by ensuring it gets the voltage it needs. Old, compromised OE wiring can limit the voltage your fuel pump receives. A hardwire kit includes everything you need to safely, easily, and reliably wire your pump directly to your battery, ensuring no matter how hard you push your pump, your wiring will be up to the task. We especially recommend this kit for use in cars over 10 years old, cars making over 400whp, and cars which were originally not designed for high horsepower.
Select from either the Deatschwerks or AEM hard wire kits when adding to cart.