??
?Features:?? Direct plug and play replacement of the OEM ECU, no re-wiring necessary.?
? Uses the cars factory sensors?
? Supports Sequential Injection (peak and hold) and Direct fire ignition?
? Windows 2000, XP, Vista, Windows 7 compatible software?
? Real time programming, instant hesitation free adjustment while engine is running?
? Fully user definable 32 x 32 mapping?
? Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)?
? Diagnostic trouble code storing & Check engine light control(Access through laptop only )?
? Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)?
? Wideband ¡°auto tuning¡± using user definable target AFR table?
? USB and CAN Communication Port?
Factory Outputs:?
? 6 x Fuel Injector outputs?
??6 x Ignition outputs?
??N-VCT (Nissan Variable CAM Timing Control)?
? Tacho, Boost Control, ?AC Clutch Relay, ?Idle Control?
? Thermo Fan, ?Check Engine Light, ?Fuel Pump (Variable Speed)?
Factory Inputs:?
??MAF sensors, ?Throttle Position Sensor,?Oxygen sensors,?
??Coolant Temperature sensor, Vehicle Speed Sensor,?
??Fuel Temperature sensor, Knock Detection Sensor?
Expansion I/O*:?
??2 x Analogue Voltage inputs?
??2 x Analogue Temperature inputs?
??4 x Digital Outputs?
*Optional auxiliary harness required to be purchased Haltech Part # HT040003?
Functions:?
? Dual Bank Closed Loop O2 Control?
? Knock Control?
? Long Term Fuel Trim?
? Over Boost?
? Rev Limiter?
??Closed & Open Loop Boost Control?
? Gear Setup?
??ACF On Base Tables?
??Transient Throttle Enhance?
? Decel Cut?
Correction Tables:? Fuel? Ignition? Boost:?
? Cranking?
??Air Temp Target Correction?
??Zero Throttle Gear Correction?
? Cylinder Trim?
??TPS Correction?
? Generic Correction 1?
? Generic Correction 2?
? Gear Correction?
? Post Start?
??Air Temp Duty Correction?
? Post Start?
Miscellaneous:?
? Data Logging: 448Kb of onboard data logging, Storage for approx 40 minutes at 10 logs per seconds,?
6 channels of data?
? Max 20 channels logging capability?
? Tune can be password protected in software?
? Rugged anodized aluminum casing?
Power Requirements:?
Source: 8.6 to 16.5 Volts DC?
Consumption: 530mA @ 12Volts DC?
Physical Dimensions:?
ECU Dimensions Length: 154mm (174mm with MAP nipple)?
Width: 158mm Height: 42mm Weight: 680g (1.5 lb)?
Applications:?
Nissan 300ZX (Z32)?
Engine Codes:
VG30 , VG30DETT?
Transmission:
Manual only?(Automatic not supported)?
The Kit includes:?
Pro Plug-in ECU, USB Cable, Programming Software CD, Quick Start Guide, Instruction Manual (on CD)?
